Sick RLY3-OSSD200 Safety Relay

Give Us a Call for Sick Dual Channel Safety Relay RLY3-OSSD200 part no: 1085344 at the lowest pricing. In-depth Technical Analysis of RLY3-OSSD200, 1085344 features Safety sensors with OSSDs and meets SIL 3 (IEC 61508), Category 4 (ISO 13849-1) and PL e (ISO 13849-1) standards with a 20 years (ISO 13849-1) mission time. It features Sequence monitoring, Automatic, Manual reset. The relay has a Front connector with spring terminals, 2 safety inputs, 1 input for reset pushbutton or external device monitoring (EDM). Outputs include 2 enabling current paths (safe), 2 application diagnostic outputs (not safe), 1 test pulse output (not safe) and LEDs for display elements and is configured through a Hard wired method. It supports 24 V DC (16.8 V ... 30 V) supply voltage, ≤ 2.4 V residual ripple, and ≤ 2.5 W (DC) power consumption. The relay operates with input voltage high at 24 V DC (11 V ... 30 V) and low at 0 V DC (–3 V ... 5 V), with an input current of 4 mA ... 6 mA . The test pulse width is ≤ 1 ms, and the test pulse rate is ≤ 10 Hz, with a response time of 10 ms. The relay has N/O contacts, positively guided, Silver alloy, gold flashed supporting 10 V AC ... 230 V AC, 10 V DC ... 230 V DC switching voltage, and 10 mA ... 6 A switching current and a total current of 12 A. Output voltage HIGH is ≥ Vs – 3 V, and output voltage LOW is ≤ 3 V. The input current (NPN) is ≤ 15 mA, and the output current (PNP) is ≤ 120 mA, with an output voltage of ≥ Vs – 3 V and a test pulse interval of 40 ms. The dimensions of 18 mm x 124.6 mm x 85.5 mm and an IP20 (IEC 60529) enclosure rating. It operates in ambient temperatures of –25 °C ... +55 °C and storage temperatures of –25 °C ... +70 °C, with air humidity of ≤ 95 %, Non-condensing. Elevate Your Project with a Quote for your requirement of Sick RLY3-OSSD200 Safety Relay. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.