In most procurement cycles, PHOENIX-CONTACT-PSR-SPP-42-230UC-URM4-4NO-2NC is considered with SMPS Phoenix, Phoenixcontact Phoenix Contact Psr Scp 24Dc Fsp2 2X1 1X2 and Phoenix Contact Relay Socket, giving decision-makers confidence that theyβve chosen the most dependable component.
Phoenix Contact PSR-SPP-42-230UC/URM4/4NO/2NC - 2702925 - Safety relays
Technical Specifications of Safety relays PSR-SPP-42-230UC/URM4/4NO/2NC 2702925
| Brand | Phoenix Contact |
| Product Type | Safe Coupling Relays |
| Product | PSR-SPP-42-230UC/URM4/4NO/2NC |
Phoenix Contact Safety relays PSR-SPP-42-230UC/URM4/4NO/2NC, 2702925 Technical Specifications
| Specification | Value |
|---|---|
| Note on application | Only for industrial use |
| Product type | Safety relays |
| Product family | PSRclassic |
| Application | Extension module |
| Output fuse | 250 V AC/DC |
| Control | 1 and 2 channel |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Recovery time | < 1 s |
| Maximum power dissipation for nominal condition | 16.1 W (at ILΒ² = 72 AΒ², PTotal max = 1.7 W + 14.4 W) |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Rated control circuit supply voltage US | 42 V AC/DC -15 % / +10 % |
| Power consumption at US | 1.5 W (with DC) |
| Rated control supply current IS | typ. 35 mA (At 42 V DC) |
| Typ. starting time with Us | < 100 ms (with Us / when controlled via A1) |
| Typical release time | < 40 ms (Control via A1 at 42 V DC) |
| Operating voltage display | 1 x LED (green) |
| Contact switching type | 1 confirmation current path |
| Contact material | AgSnO2 |
| Limiting continuous current | 6 A (observe derating) |
| Sq. Total current | 36 A2 (observe derating) |
| Switching capacity | min. 50 mW |
| Output fuse | 1 A (gL/gG) |
| pluggable | yes |
| Connection method | Push-in connection |
| Conductor cross section rigid | 0.2 mmΒ² ... 1.5 mmΒ² |
| Conductor cross section flexible | 0.2 mmΒ² ... 1.5 mmΒ² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Width | 22.5 mm |
| Height | 112 mm |
| Depth | 114.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA |
| Category | 4 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -20 Β°C ... 55 Β°C (observe derating) |
| Ambient temperature (storage/transport) | -40 Β°C ... 85 Β°C |
| Maximum altitude | β€ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (operation) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
| Mounting type | DIN rail mounting |
| Mounting position | vertical or horizontal |
| Inrush current | max. 6 A |
| Protective circuit | Surge protection; Suppressor diode and varistors |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mmΒ² ... 1.5 mmΒ² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mmΒ² ... 1.5 mmΒ² (only together with CRIMPFOX 6) |
| Output description | 2 N/C contacts in parallel, floating |
| Number of outputs | 1 |
| Switching frequency | max. 0.5 Hz |
| Identification | CE-compliant |
| Assembly note | See derating curve |
| Switching voltage | min. 5 V AC/DC |
| Apparent power | max. 3.5 VA (at US) |
