Procurement teams shortlist PHOENIX-CONTACT-PSR-PC40-2NO-1DO-24DC-SC with SMPS Phoenix, Phoenixcontact Phoenix Contact Industrial Ethernet Switches and Phoenixcontact Phoenix Contact Psr Pc50 1No 1Do 24Dc Sc, aligning budget approvals, warranty terms, and multisite availability for smoother rollout across plants.
Phoenix Contact PSR-PC40-2NO-1DO-24DC-SC - 2700588 - Coupling relay
Technical Specifications of Coupling relay PSR-PC40-2NO-1DO-24DC-SC 2700588
| Brand | Phoenix Contact |
| Product Type | Safe Coupling Relays |
| Product | PSR-PC40-2NO-1DO-24DC-SC |
Phoenix Contact Coupling relay PSR-PC40-2NO-1DO-24DC-SC, 2700588 Technical Specifications
| Specification | Value |
|---|---|
| Note on application | Only for industrial use |
| Product type | Coupling relay |
| Product family | PSRmini |
| Application | Safe switch off |
| Output fuse | Class I, Div. 2, Groups A, B, C, D, T4 |
| Control | 1-channel |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Recovery time | 500 ms |
| Maximum power dissipation for nominal condition | 5.5 W (ILΒ² = 60 AΒ²) |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, signal output to the enabling current paths, 4 kV/basic insulation between the enabling current paths and between all current paths and housing |
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
| Power consumption at US | typ. 1.8 W |
| Rated control supply current IS | typ. 75 mA (depending on load M1 +100 mA) |
| Typ. starting time with Us | < 200 ms (when controlled via A1, automatic start) |
| Typical release time | < 35 ms (when controlled via A1) |
| Operating voltage display | 1 x LED (yellow) |
| Contact switching type | 2 enabling current paths |
| Contact material | AgSnO2 |
| Limiting continuous current | 6 A (High demand) |
| Maximum inrush current | 500 mA (Ξt = 1 ms at Us) |
| Sq. Total current | 60 A2 (observe derating) |
| Switching capacity | min. 60 mW |
| Output fuse | 150 mA fast blow |
| pluggable | yes |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mmΒ² ... 2.5 mmΒ² |
| Conductor cross section flexible | 0.2 mmΒ² ... 2.5 mmΒ² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Width | 12.5 mm |
| Height | 112.2 mm |
| Depth | 114.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA |
| Safety Integrity Level (SIL) | 3 |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -40 Β°C ... 70 Β°C (observe derating) |
| Ambient temperature (storage/transport) | -40 Β°C ... 85 Β°C |
| Maximum altitude | β€ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| Certificate | 11253-14 HH |
| Mounting type | DIN rail mounting |
| Mounting position | vertical, horizontal, with front of module upward |
| Inrush current | min. 3 mA |
| Filter time | max. 2 ms (at A1-A2; test pulse width) |
| Protective circuit | Serial protection against polarity reversal; Suppressor diode 33 V |
| Designation | A1/A2 |
| Status display | 2 x LED (green) |
| Output description | PNP |
| Number of outputs | 1 (non-safety-related) |
| Switching frequency | max. 0.1 Hz |
| Identification | C, EMC2 |
| Assembly note | See derating curve |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Switching voltage | min. 12 V AC/DC |
| Voltage | approx. 22 V DC (Us - 2 V) |
| Current | max. 100 mA |
| Short-circuit protection | no |
| Error indication | 1 x LED (red) |
| Number of inputs | 2 (non-safety-related) |
| Current consumption | < 5 mA |
| Max. permissible overall conductor resistance | 150 Ξ© |
| Voltage at input/start and feedback circuit | 24 V DC -15 % / +10 % |
