| Note on application | Only for industrial use |
| Product type | Coupling relay |
| Product family | PSRmini |
| Application | Safe switch off |
| Output fuse | Class I, Div. 2, Groups A, B, C, D, T4 |
| Control | 1 and 2 channel |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Recovery time | 500 ms |
| Maximum power dissipation for nominal condition | 3.49 W (IL² = 36 A²) |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
| Rated control circuit supply voltage US | 24 V DC -20 % / +25 % |
| Power consumption at US | typ. 1.08 W |
| Rated control supply current IS | typ. 45 mA |
| Typ. starting time with Us | < 70 ms (with Us when controlled via A1) |
| Typical release time | < 10 ms (when controlled via A1) |
| Operating voltage display | 1 x LED (yellow) |
| Contact switching type | 1 confirmation current path |
| Contact material | AgCuNi, + Au |
| Limiting continuous current | 100 mA |
| Sq. Total current | 36 A2 (observe derating) |
| Switching capacity | min. 20 mW |
| Output fuse | 150 mA Fast-blow |
| pluggable | no |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 26 ... 12 |
| Stripping length | 12 mm |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Width | 6.8 mm |
| Height | 93.1 mm |
| Depth | 102.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PBT |
| Safety Integrity Level (SIL) | 3 |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -40 °C ... 70 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| Certificate | 2022122304115695 |
| Mounting type | DIN rail mounting |
| Mounting position | vertical or horizontal |
| Inrush current | min. 1 mA |
| Filter time | max. 2 ms (at A1-A2 in the event of voltage dips at Us) |
| Protective circuit | Serial protection against polarity reversal; 35 V suppressor diode |
| Designation | A1/A2 |
| Status display | 1 x LED (green) |
| Output description | 2 N/C contacts in series, without delay, floating |
| Number of outputs | 1 (safety-related) |
| Switching frequency | max. 0.1 Hz |
| Identification | Ex ec nC IIC T4 Gc |
| Assembly note | See derating curve |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Switching voltage | min. 5 V DC |
