Procurement managers rarely finalize EL3174-0030 without reviewing Beckhoff El9410, El9550 Beckhoff and Beckhoff El2809, ensuring that the chosen component meets budget, compliance, and delivery conditions.
EL3174-0030 - Beckhoff EtherCAT Terminal Analog Input
Technical Specifications of Beckhoff EtherCAT Terminal Analog Input EL3174-0030:
| Brand | Beckhoff |
| Product Type | EtherCAT Terminal Analog Input |
| Product | EL3174-0030 |
EL3174-0030 Beckhoff EtherCAT Terminal Analog Input Technical Specifications
| Specification | Value |
|---|---|
| Number of inputs | 4 |
| Ground reference (input) | voltage: differential, current: single-ended |
| Measurement error/uncertainty | > 200 kΩ | typ. 85 Ω |
| Input filter limit frequency | 5 kHz |
| Dielectric strength | max. 30 V (current measurement) |
| Measuring range, nominal | -10/0â¦+10 V | -20/0/+4â¦+20 mA |
| Measuring range, technical | -10.73â¦+10.73 V | -21.47â¦+21.47 mA |
| Measurement error/uncertainty 2 | < ±0.3% (relative to full scale value) |
| Housing - Design form | HD (High Density) housing with signal LEDs |
| Housing - Material | polycarbonate |
| Housing - Dimensions (W x H x D) | 12Â mm x 100Â mm x 68 mm |
| Housing - Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Housing - Side by side mounting by means of | double slot and key connection |
| Housing - Marking | labeling of the BZxxxx series |
| Housing - Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Housing - Connection cross-section | s*: 0.0..2.5 mm²,st*: 0.08..2.5 mm²,f*: 0.14...1.5 mm² |
| Housing - Connection cross-section AWG | s*: AWG28...14,st*: AWG28...14,f*: AWG26...16 |
| Housing - Stripping length | 8…9 mm |
| Housing - Current load power contacts | Imax: 10 A |
| Power supply | via the E-bus |
| Distributed clocks | yes |
| Distributed clock precision | << 1 µs |
| Common-mode voltage UCM | max. 35 V (voltage measurement) |
| Conversion time | minimum 150 µs |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Current consumption E-bus | typ. 180 mA |
| Bit width in the process image | inputs: 16 byte |
| Configuration | no address or configuration setting |
| Special features | U/I parameterizable, ExtendedRange, standard and compact process image, activatable FIR/IIR filters |
| Weight | approx. 65Â g |
| Operating temperature | 0....55°C |
| Storage temperature | -25.....85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx |
| Current consumption power contacts | load-dependent |
Related Products
