The Omron CS1D-PA207R PLC Power Supply Unit provides power for CS1D duplex Programmable Logic Controller systems using a 24 VDC input supply. It delivers 5 VDC at 10 A and 24 VDC at 0.4 A for compatible controller components within the duplex architecture. The unit supports a redundant power configuration, allowing the control system to maintain its power architecture when redundancy is implemented with the required system components. This makes it suitable for CS1D installations designed around continuous controller operation and duplicated system resources. The CS1D-PA207R supports the CS1D duplex architecture and belongs to the redundant PLC power supply range associated with Omron industrial control systems.
100 to 120 V AC: 30 A
max. (cold start at normal
temperatures); 8 ms max.
200 to 240 V AC: 40 A
max. (cold start at normal
temperatures); 8 ms max.
Power supply output capacity
5 V DC, 7 A (including the CPU Unit power supply)
26 V DC, 1.3 A
Total: 35 W max.
Insulation Resistance
20 MΩ min. (at 500 V DC)
between AC external and
GR terminals
Dielectric Strength
2,300 V AC 50/60 Hz for 1
min between the AC external
and GR terminals
Leakage current: 10 mA
max.
1,000 V AC 50/60 Hz for 1
min between the AC external
and GR terminals
Leakage current: 10 mA
max.
Grounding
Less than 100 Ω
Ambient operating temperature
0 to 55°C
Ambient storage temperature
−20 to 75°C (excluding battery)
Ambient operating humidity
10% to 90% (with no condensation)
Atmosphere
Must be free from corrosive gases
Enclosure
Mounted in a panel.
Power Supply Voltage
100 to 120 V AC/200 to 240 V, 50/60 Hz
Power Consumption
150 VA max.
Noise immunity
2 kV on power supply line
Vibration resistance
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z
directions for 80 minutes
(Time coefficient: 8 minutes × coefficient factor 10 = total time 80 min.)
