Home Pepperl Fuchs Photoelectric Sensor Through Beam M100/MV100-RT/35/76a/95/103 Pepperl Fuchs M100/MV100-RT/35/76a/95/103 Photoelectric Sensor The Pepperl Fuchs M100/MV100-RT/35/76a/95/103 Photoelectric Sensor offers a 0 ... 20 m detection range, 1 PNP output, short-circuit protected, reverse polarity protected, open collector output, and M8 x 1 connector, 4-pin connection. Manufactured by Pepperl Fuchs under the P&F Photoelectric Sensor category, this model belongs to the through beam sensor.
Brand Pepperl Fuchs Product Type Photoelectric Sensor Model Number M100/MV100-RT/35/76a/95/103
Pepperl Fuchs M100/MV100-RT/35/76a/95/103 Photoelectric Sensor – Technical Specifications Specification Value Emitter M100-RT/35/76a/95 Receiver MV100-RT/35/95/103 Effective detection range 0 ... 20 m Threshold detection range 30 m Light source LED Light type modulated visible red light Diameter of the light spot approx. 2 m at a distance of 30 m Opening angle approx. 2 ° Optical face PMMA Operation indicator LED green: power on Function indicator Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted Control elements Light-on/dark-on changeover switch Operating voltage 10 ... 30 V DC Ripple max. 10 % No-load supply current Emitter: ≤ 15 mAReceiver: ≤ 8 mA Switching type The switching type of the sensor is adjustable. The default setting is: light-on Signal output 1 PNP output, short-circuit protected, reverse polarity protected, open collector Switching voltage max. 30 V DC Switching current max. 100 mA , resistive load Voltage drop ≤ 1.5 V DC Switching frequency 250 Hz Response time 2 ms Ambient temperature -30 ... 60 °C (-22 ... 140 °F) Storage temperature -40 ... 70 °C (-40 ... 158 °F) Degree of protection IP67 Connection M8 x 1 connector, 4-pin Housing PC (Polycarbonate) Mass approx. 20 g (emitter and receiver) Tightening torque, fastening screws 0.6 Nm Height 31 mm Width 11 mm Depth 20 mm
