In most procurement cycles, DCCK-30-M-20-AIK is considered with IFM Proximity Sensor, Di Soric Insm Q05 B0 8Po 2C and Omron Proximity Sensor Suppliers In Patna, giving decision-makers confidence that they’ve chosen the most dependable component.
Di-soric DCCK 30 M 20 AIK Proximity Sensor
The Di-soric DCCK 30 M 20 AIK Proximity Sensor offers Thread design, output, andCable, 2.0 m (flying leads) connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the DCC Series.
| Brand | Di-soric |
| Product Type | Proximity Sensor |
| Model Number | DCCK 30 M 20 AIK |
Di-soric DCCK 30 M 20 AIK Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Product series | INA Analog |
| Operating principle | inductive |
| Design | Thread |
| Thread | M30 x 1.5 |
| Installation type | quasi-flush |
| Internal power consumption | 10 mA |
| Switching distance (SN) | 0 … 20 mm |
| Standardized measuring plate | 60 x 60 x 1 mm |
| Service voltage | 10 … 30 V DC |
| Insulation voltage endurance | According to IEC 60947-5-2 (7.2.3.1) |
| Housing length | 35 mm |
| Housing material | Brass (CuZn, nickel-plated) |
| Protection class | III, operation on protective low voltage |
| Ambient temperature during operation | -25 … +70 °C |
| Protection type | IP 67 |
| Connection | Cable, 2.0 m (flying leads) |
| Characteristics | extremely high operating distance |
| Switching frequency | 200 Hz |
| Tightening torque | 70 Nm |
| Material of sensor probe | PBTP (Crastin) |
| Analog output | 0 … 5 V, 1 … 5 mA |
