If you’re not fully sure about DCC-05-V-0-6-PSLK-E, taking a closer look at IFM Proximity Sensor, Di Soric Insm Q05 B0 8Po 2C and Omron Proximity Sensor Suppliers In Patna often helps compare reliability, cost, and availability.
Di-soric DCC 05 V 0.6 PSLK-E Proximity Sensor
The Di-soric DCC 05 V 0.6 PSLK-E Proximity Sensor offers Thread design, pnp, 200 mA, NO output, andCable, 2.0 m (flying leads) connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the INS Series.
| Brand | Di-soric |
| Product Type | Proximity Sensor |
| Model Number | DCC 05 V 0.6 PSLK-E |
Di-soric DCC 05 V 0.6 PSLK-E Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Product series | INM-100 Miniature |
| Operating principle | inductive |
| Design | Thread |
| Thread | M5 x 0.5 |
| Installation type | Flush |
| Internal power consumption | < 10 mA |
| Switching distance (SN) | 0.6 mm |
| Standardized measuring plate | 5 x 5 x 1 mm |
| Service voltage | 10 … 30 V DC |
| Insulation voltage endurance | According to IEC 60947-5-2 (7.2.3.1) |
| Housing length | 25 mm |
| Housing material | Stainless steel (V2A) |
| Protection class | III, operation on protective low voltage |
| Switching output | pnp, 200 mA, NO |
| Voltage drop (max.) | 2 V (200 mA) |
| Ambient temperature during operation | -25 … +70 °C |
| Protection type | IP 68 |
| Connection | Cable, 2.0 m (flying leads) |
| Material of cable | Polyurethane |
| Characteristics | < 20 bar, pressure-resistant |
| Switching hysteresis (max.) | < 10 % |
| Switching frequency | 3000 Hz |
| Tightening torque | 1.5 Nm |
Related Products
