Home Products Ultrasonic Sensor di-soric US 18 M 800 IU-B4 Di-soric US 18 M 800 IU-B4 Ultrasonic Sensor The Di-soric US 18 M 800 IU-B4 Ultrasonic Sensor offers Thread design, 80 … 800 mm range, Push-pull, 150 mA, NO/NC, switchable output, andConnector, M12, 4-pin connection. Manufactured by Di-soric under the Di-soric Ultrasonic Sensor category, this model belongs to the US Series.
Brand Di-soric Product Type Ultrasonic Sensor Model Number US 18 M 800 IU-B4
Di-soric US 18 M 800 IU-B4 Ultrasonic Sensor - Technical Specifications Specification Value Operating principle Ultrasonic sensor, Ultrasonic barrier Evaluation digital, analog Design Thread Characteristics IO-Link Service voltage 18 … 30 V DC No-load current (max.) 40 mA (24 V DC) Insulation voltage endurance 500 V Thread M18 x 1 Housing length 55 mm Transmission exit axial Assembly distance (sensor to sensor) 550 mm Functions Analog 0…10V / 4…20mA / 0… 20mA (Pin 2), Teach, Out 1, IO-Link, multiplex, synchronization (PIN 4) Switching output Push-pull, 150 mA, NO/NC, switchable Max. switch current 150 mA Voltage drop (max.) 2 V Interface IO-Link (V1.1, COM2 (38.4 kBd) Smart Sensor Profile) Nominal switching distance (Sn) 800 mm Range 80 … 800 mm Adjustment range 80 … 800 mm (Teach in) Resolution 1.0 mm (Adjusted measuring range/4095 (analog output)) Switching hysteresis (max.) 2 … 20 mm (Adjustable up to 20 mm via IO-Link) Reproducibility < 1 mm Display LED 1x Green - Status, 1x yellow - Switching output Ultrasonic frequency 200 kHz Switching frequency < 5 Hz Ambient temperature during operation -25 … +70 °C Protection type IP 67 Connection Connector, M12, 4-pin Connection cable VKHM … /4 Housing dimensions M18 x 55 mm Protection class III, operation on protective low voltage Housing material Brass (nickel-plated) Material Epoxy resin, PUR (Transducer surface) Weight 30 g
