If youβre not fully sure about ENC-1-3-T-24, taking a closer look at Autonics Proximity Sensor, Baumer Encoder and Rotary Encoders E50S8 1024 6 L often helps compare reliability, cost, and availability.
Autonics ENC-1-3-T-24 Rotary Encoder
The Autonics ENC-1-3-T-24 Rotary Encoder offers Totem pole control output, Axial cable type, 180kHz allowable frequency, 12-24VDC power supply. Manufactured by Autonics under the Autonics Rotary Encoder category, this model belongs to the ENC Series.
| Brand | Autonics |
| Product Type | Rotary Encoder |
| Model Number | ENC-1-3-T-24 |
Autonics ENC-1-3-T-24 Rotary Encoder β Technical Specifications
| Specification | Value |
|---|---|
| Max. response frequency | 180kHz |
| Max. allowable revolution | 5000rpm |
| Output phase | A, B |
| Control output | Totem pole |
| Power supply | 12-24VDC |
| Connection type | Axial cable type |
| Wheel diameter | 250mm |
| Gear ratio | 4:1 |
| Number of pulses | 1 |
| Min. measurement unit | 1m |
| Protection structure | IP50 |
| Environment_Ambient temperature | -10 to 70β, storage: -25 to 85β |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Weight | Approx. 494g |
The Autonics ENC-1-3-T-24 Rotary Encoder is a precision-engineered Wheel Type Incremental Encoder that converts mechanical motion into electrical signals for length and position control. It offers a maximum response frequency of 180kHz and supports rotational speeds up to 5000rpm, making it suitable for high-speed automation lines.
This model delivers A and B output phases using a Totem pole control output, ensuring compatibility with industrial PLCs and motion controllers. Operating on a stable 12β24VDC supply with Β±5% tolerance, it guarantees consistent signal reliability under varying voltage conditions. The encoder features a 250mm wheel diameter with a 4:1 gear ratio, producing one pulse per rotation and providing a minimum measurement unit of 1 meter.
Built for durability, the ENC-1-3-T-24 includes an axial cable connection for simplified wiring and carries an IP50 protection rating, safeguarding against dust intrusion. It operates reliably in ambient temperatures from β10Β°C to 70Β°C and in humidity conditions up to 85% RH. With a solid weight of 494g and rugged construction, this encoder is well-suited for demanding factory environments. Full specifications are available on the Autonics Sensors & Controllers page or in the Autonics Encoders catalog.
The Autonics ENC-1-3-T-24 Wheel Type Incremental Rotary Encoder is commonly used in conveyor length measurement, sheet cutting, textile unwinding, and packaging systems where linear distance tracking is essential. Its one-pulse-per-meter design makes it especially useful for applications where simplicity and coarse resolution are preferred over high-precision feedback. Maintenance engineers value its stable output, easy installation, and low-maintenance operation. For factories needing reliable automation support, the Autonics ENC-1-3-T-24 is a proven choice.
