+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Autonics BF4G-E Fiber Optic Sensor

The Autonics BF4G-E Fiber Optic Sensor offers Green LED(525nm) light source, Frequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms response time, 12-24VDC power supply, Light ON/Dark ON(set by ON/OFF button) operation mode, NPN open collector control output. Manufactured by Autonics under the Autonics Fiber Optic Sensor category, this model belongs to the Autonics BF3 Series.

Autonics BF4G-E
BrandAutonics
Product TypeDigital Display Fiber Optic Amplifiers
Model NumberBF4G-E

Autonics BF4G-E Fiber Optic Sensor – Technical Specifications

SpecificationValue
TypeExternal synchronization input type
Light sourceGreen LED(525nm)
Response timeFrequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms
Power supply12-24VDC
Current consumptionMax. 45mA
Operation modeLight ON/Dark ON(set by ON/OFF button)
Control outputNPN open collector
Self-diagnosis outputON state under unstable sensing(when the target stays for 300ms in unstable level),ON state when control output is short-circuited•Load voltage: Max. 30VDC @(=)•Load current: Max. 50mA•Residual voltage - Max. 1V(load current: 50mA), Ma
Cable specificationØ4mm, 6-wire, 2m(AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Input of stop transmission functionBuilt-in
External synchronization functionBuilt-in(gate/trigger)
Sensitivity adjustmentManual
Environment_Ambient illuminationSunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature-10 to 50℃, storage: -20 to 70℃
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
MaterialCase: Heat-resistance acrylonitrile butadiene styrene, Cover: Polycarbonate
AccessoriesFixing bracket, Bolts, Nuts
WeightApprox. 120g(approx. 65g)

The Autonics BF4G-E is an advanced Fiber Optic Sensor Amplifier with a digital display and built-in external synchronization input. It uses a Green LED (525nm) light source and delivers excellent responsiveness with a maximum reaction time of 0.5ms (Frequency 1) and 0.7ms (Frequency 2), making it suitable for rapid production and inspection lines. The sensor operates on a 12–24VDC supply (±10%) with a low current consumption of max. 45mA, maintaining energy efficiency across demanding environments. The NPN open collector output ensures seamless connection with PLCs, and Light ON / Dark ON modes can be toggled using the onboard ON/OFF button.

Additional features include built-in stop transmission and external sync functions such as gate and trigger modes. It also supports self-diagnosis output, which activates when sensing stability is compromised or during control output short-circuits, providing early fault alerts. The BF4G-E is designed to operate reliably in ambient conditions ranging from -10 to 50°C, with humidity tolerances between 35% and 85% RH. Housed in a rugged heat-resistant ABS and polycarbonate body, and weighing approximately 120g, this model ensures long-term use even in tough industrial setups. To explore all compatible Autonics sensing products, visit the Autonics Sensors & Controllers or check the full range of Autonics Fiber Optic Sensors.

Engineers and technicians appreciate the simple ON/OFF button for mode switching, as well as the built-in fault detection that prevents unplanned downtime. With its compact design and robust build, the Autonics BF4G-E fits easily into control cabinets and performs reliably under fluctuating conditions. Whether you're installing it in a cleanroom or a light-sensitive inspection area, this amplifier provides accurate and consistent signal output with minimal configuration time.