+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Autonics BF4G-R Fiber Optic Sensor

The Autonics BF4G-R Fiber Optic Sensor offers Green LED(525nm) light source, Frequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms response time, 12-24VDC power supply, Light ON/Dark ON(set by ON/OFF button) operation mode, NPN open collector control output. Manufactured by Autonics under the Autonics Fiber Optic Sensor category, this model belongs to the Autonics BF3 Series.

Autonics BF4G-R
BrandAutonics
Product TypeDigital Display Fiber Optic Amplifiers
Model NumberBF4G-R

Autonics BF4G-R Fiber Optic Sensor – Technical Specifications

SpecificationValue
TypeExternal input sensitivity setting type
Light sourceGreen LED(525nm)
Response timeFrequency 1: Max. 0.5ms, Frequency 2: Max. 0.7ms
Power supply12-24VDC
Current consumptionMax. 45mA
Operation modeLight ON/Dark ON(set by ON/OFF button)
Control outputNPN open collector
Timer functionOFF Delay(40ms)
Self-diagnosis outputON state under unstable sensing(when the target stays for 300ms in unstable level),ON state when control output is short-circuited•Load voltage: Max. 30VDC @(=)•Load current: Max. 50mA•Residual voltage - Max. 1V(load current: 50mA), Ma
Cable specificationØ4mm, 6-wire, 2m(AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Input of stop transmission function-
External synchronization function-
Sensitivity adjustmentManual External input(SW1, SW2)
Environment_Ambient illuminationSunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature-10 to 50℃, storage: -20 to 70℃
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
MaterialCase: Heat-resistance acrylonitrile butadiene styrene, Cover: Polycarbonate
AccessoriesFixing bracket, Bolts, Nuts
WeightApprox. 120g(approx. 65g)

The Autonics BF4G-R offers fast, stable detection performance with its External Input Sensitivity Setting type and Green LED (525nm) light source. It features a rapid response time of 0.5ms (Frequency 1) and 0.7ms (Frequency 2), ideal for high-speed part counting, edge detection, and transparent object identification. Powered by 12–24VDC ±10%, this sensor maintains stable operation with low current consumption of max. 45mA. The amplifier allows engineers to switch between Light ON / Dark ON modes easily via the ON/OFF button, and its NPN open collector control output integrates well into existing industrial control systems.

The BF4G-R includes a practical OFF Delay (40ms) function to help filter unwanted signal noise, improving detection accuracy. It also features self-diagnosis output for error states like unstable sensing or output short-circuiting—giving real-time feedback for preventive maintenance. Built with heat-resistant ABS housing and polycarbonate cover, the sensor can operate in ambient conditions from -10°C to 50°C and humidity up to 85% RH. With a compact 6-wire design and included mounting accessories, installation is fast and reliable. For more models, visit the Autonics Sensors & Controllers page or browse the full range at Autonics Fiber Optic Sensors.

Technicians appreciate its ability to adapt across various object materials, from glossy surfaces to transparent containers. The real-time diagnostic alerts and simple ON/OFF setup reduce setup time and allow for smarter, preventive maintenance routines. Whether you're an OEM designing high-speed machines or a plant engineer managing line upgrades, the Autonics BF4G-R ensures dependable sensing performance with minimal configuration hassle.