During technical comparisons, ELECTRIC-ATV212HU22N4 appears alongside Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software so engineers assess signal types, ingress protection, and ambient tolerances accurately.
ATV212HU22N4 - Schneider Altivar 212 2.2kW 3 Phase Drive
The Schneider ATV212HU22N4 Variable Speed Drive offers a 3 hp motor power, 2.2 kW, 323…528 Vsupply voltage limits and 1 open style1 RJ45 connector type. Manufactured by Schneider under the Schneider Variable Speed Drive category, this model belongs to the Altivar212 Series.
| Brand | Schneider |
| Product Type | Variable Speed Drive |
| Model Number | ATV212HU22N4 |
ATV212HU22N4 Schneider Altivar 212 2.2kW 3 Phase Drive Technical Specifications:
| Specification | Value |
|---|---|
| Connector Type | 1 open style1 RJ45 |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Motor power range AC-3 | 2.2…3 kW at 380…440 V 3 phases2.2…3 kW at 480…500 V 3 phases |
| Net weight | 2 kg |
| Switching frequency | 6...16 kHz adjustable12...16 kHz with derating factor |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323…528 V |
| Operating position | Vertical +/- 10 degree |
| Discrete input type | F programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm |
| Speed range | 1…10 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| IP degree of protection | IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529 |
| Power dissipation in W | 103 W |
| Network frequency | 47.5...63 Hz |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 6 mm² / AWG 10 |
| EMC filter | Class C2 EMC filter integrated |
| Motor starter type | Variable speed drive |
| Depth | 150 mm |
| Range of product | Altivar 212 |
| Nominal switching frequency | 12 kHz |
| Discrete output type | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles |
| Acceleration and deceleration ramps | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s |
| Warranty | 18 months |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Display unit: 0.1 HzAnalog input: 0.024/50 Hz |
| Tightening torque | 1.3 N.m, 11.5 lb.in (L1/R, L2/S, L3/T)0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) |
| Transmission rate | 9600 bps or 19200 bps |
| Assembly style | With heat sink |
| Motor power hp | 3 hp |
| Dielectric strength | 3535 V DC between earth and power terminals5092 V DC between control and power terminals |
| Regulation loop | Adjustable PI regulator |
| Speed drive output frequency | 0.5…200 Hz |
| Analogue output type | FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bitsFM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits |
| Analogue input type | VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable PTC probe: 0...6 probes, impedance: 1500 OhmVIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits |
| Ambient air temperature for storage | -25…70 °C |
| Type of cable | Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPRWithout mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVCWith UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC |
| Type of polarization | No impedance |
| Motor power kW | 2.2 kW |
| Variable speed drive application selection | Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump |
The Schneider Electric ATV212HU22N4 is a reliable 2.2 kW Variable Frequency Drive (VFD) from the Altivar 212 series, designed for precise control of three-phase motors in industrial and building automation applications. Ideal for HVAC fans, pumps, and scroll compressors, this Schneider VFD ensures smooth motor speed regulation, energy efficiency, and easy integration into control panels.
With an adjustable switching frequency of 6–16 kHz and a rated supply voltage of 380–480 V, the ATV212HU22N4 delivers flexible motor operation across a speed range of 1–10. Its robust IP20, IP21, and IP41 protection ensures safe operation even in harsh industrial environments, while the integrated Class C2 EMC filter provides electromagnetic compatibility.
Features like automatic and linear acceleration/deceleration ramps, adjustable PI regulation, and configurable relay logic enable precise control and enhanced performance. Compact at 2 kg with a 150 mm depth, and backed by an 18-month warranty and storage tolerance from -25°C to 70°C, the Schneider Electric ATV212HU22N4 2.2 kW VFD is a trusted solution for efficient and reliable motor control in industrial and building automation systems.
Related Products
