ATS130N2D73LT: Schneider ATS130 Soft Starter 200 to 480V AC
The ATS130N2D73LT is a high-capacity soft starter from Schneider Electric, part of the robust Schneider ATS130 Soft Starter series.
| Brand | Schneider |
| Product Type | VFD(Variable Frequency Drive) |
| Product | ATS130N2D73LT |
Schneider ATS130 Soft Starter 200 to 480V AC ATS130N2D73LT Technical Specifications:
| Specification | Value |
|---|---|
| Power supply frequency | 50...60 Hz +/- 5 Hz |
| Operating cycles/hour | 10 cyc/h |
| Maximum deflection under vibratory load (during transport) | 3 mm at 2-9 Hz |
| Maximum acceleration under vibratory load (during storage) | 10 m/s² at 9...200 Hz |
| Height | 166 mm |
| Relay output number | 1 |
| Display type | 1 LED (green) for control power energized1 LED (yellow and red) for motor operation phases, errors |
| Pollution degree | Level 2 |
| Minimum motor current | 20 % Ie |
| Protection type | Phase failure: mainsThermal protection: starterBypass error: starterControl voltage Us: starter |
| Package 1 Length | 28.000 cm |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 9...200 Hz |
| Environmental class (during operation) | Without salt mist: 3C3 conforming to IEC 60721-3-33S3 conforming to IEC 60721-3-3 |
| Suitable for mounting onto standard rails | TRUE |
| Overload current profile | 300 % Ie for 5 s |
| [Uimp] rated impulse withstand voltage | 4 kV |
| Function available | Deceleration voltage rampBoost |
| Minimum switching current | 2.5 mA at 24 V DC for relay outputs |
| Operating altitude | 0...1000 m without derating1000...4000 m 1 % per 100 m |
| Package 1 Weight | 1.510 kg |
| Motor power hp | 20 hp at 200 V normal duty20 hp at 208 V normal duty25 hp at 230 V normal duty50 hp at 460 V normal duty50 hp at 480 V normal duty |
| IP degree of protection | IP20 |
| Ambient air transport temperature | -40…70 °C |
| Product or component type | Soft starter |
| Utilisation category | AC-53A |
| Ue power supply voltage | 200...480 V - 15...10 % |
| Maximum switching current | On resistive load for relay outputs : 1 A 250 V AC 400000 cyclesOn resistive load for relay outputs : 1 A 30 V DC 400000 cyclesOn inductive load for relay outputs : 1 A 250 V AC cos phi = 0.4 100000 cyclesOn inductive load for relay outputs : 1 A 30 V DC cos phi = 0.4 100000 cycles |
| Depth | 165 mm |
| Operating position | Vertical +/- 30 degree |
| [Ui] rated insulation voltage | 480 V |
| Network number of phases | 3 phases |
| Input compatibility | Discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| Device connection | In line |
| Width | 55 mm |
| Torque control | FALSE |
| Ambient air temperature for storage | -25…70 °C |
| Control power | 21.6 W starting and stopping3 W steady state |
| Range of product | Altivar Soft Starter ATS130 |
| [Uc] control circuit voltage | 24 V DC |
| Relative humidity | 5…95 % non condensing without dripping water conforming to IEC 60068-2-3 |
| Power loss per device current dependent | 20 W |
| Net weight | 1.3 kg |
| [Ie] rated operational current | 73 A in line (at <40 °C) |
| Maximum deflection under vibratory load (during storage) | 3 mm at 2-9 Hz |
| Ambient air temperature for operation | -10…40 °C (without derating)40…60 °C (with current derating 1.5 % per °C) |
| Motor power kW | 22 kW at 230 V normal duty37 kW at 400 V normal duty45 kW at 440 V normal duty |
| Power loss static current independent | 3 W |
| Power loss during starting | 454 W 300 % Ie |
| Relay output type | Relay outputs R1A, R1C NO |
| Number of Units in Package 1 | 1 |
The Schneider ATS130N2D73LT supports a 3-phase power supply with frequency tolerance of 50–60 Hz ±5% and delivers up to 73 A rated operational current without derating below 40°C. It can handle motors up to 45 kW at 440 V, 37 kW at 400 V, or 22 kW at 230 V, and is designed for in-line connection with standard control panels.
Equipped with 1 relay output (R1A, R1C NO), the device includes advanced protections such as phase failure detection, thermal protection, and bypass error monitoring. It supports up to 10 cycles/hour and includes a 24 V DC control circuit compatible with PLC-level discrete input (EN/IEC 61131-2).
The unit has a compact form factor: 166 mm (H) × 55 mm (W) × 165 mm (D), weighs 1.3 kg, and is DIN-rail mountable. Its environmental resilience includes IP20 protection, compliance with IEC 60721-3-3 (3C3/3S3), and operating altitude support up to 4000 m with derating. The starter operates from -10°C to 60°C, with 454 W power loss during startup at 300% Ie. The Schneider ATS130 Soft Starter model ATS130N2D73LT is designed for large motor-driven systems such as pumps, chillers, industrial mixers, fans, and compressors. It offers boost and deceleration voltage ramp functions to minimize mechanical stress and prevent equipment damage during start and stop cycles.
Industrial engineers prefer this soft starter for its precise control, protection-rich design, and ability to handle high inertia loads. Its LED indicators, reliable relay output switching, and rugged build make it a dependable solution for heavy-duty plant environments across manufacturing, water treatment, and infrastructure sectors.
For motors up to 73 A and working voltages up to 480 V AC, the ATS130N2D73LT provides smooth startup, energy efficiency, and long-term stability. IndMALL offers this unit with fast delivery, expert support, and competitive pricing across India’s industrial hubs.
Related Products
