If you’re not fully sure about KCD2-SCD-EX1-SP, taking a closer look at P&F Photoelectric Sensor, Pepperl Fuchs Kfd2 Stc5 Ex2 and Pepperl Fuchs Double Sheet Sensors often helps compare reliability, cost, and availability.
Pepperl Fuchs KCD2-SCD-Ex1-SP Current Driver
The Pepperl Fuchs KCD2-SCD-Ex1-SP Current Driver offers a Analog output signal type, SIL 2, and spring terminals connection. Manufactured by Pepperl Fuchs under the P&F Current Driver category.
| Brand | Pepperl Fuchs |
| Product Type | Intrinsic Safety Barrier |
| Model Number | KCD2-SCD-Ex1-SP |
Pepperl Fuchs KCD2-SCD-Ex1-SP Current Driver – Technical Specifications
| Specification | Value |
|---|---|
| Signal type | Analog output |
| Safety Integrity Level (SIL) | SIL 2 |
| Rated voltage | 19 ... 30 V DC |
| Control circuit Connection | - |
| Control circuit Voltage | - |
| Control circuit Current | - |
| Field circuit Connection | - |
| Field circuit Voltage | - |
| Field circuit Current | - |
| Influence of ambient temperature | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) |
| Damping | - |
| Rise time | 10 to 90 % ≤ 10 ms |
| Galvanic isolation Input/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Conformity Electromagnetic compatibility | NE 21:2017 EN 61326-3-2:2018 |
| Conformity Degree of protection | IEC 60529 |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP20 |
| Connection | spring terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2 |
| EU-type examination certificate | CESI 06 ATEX 021 X |
| Certificate | CESI 19 ATEX 021 X |
Send Your Inquiry for P&F Spring Terminals Current Drivers KCD2-SCD-Ex1-SP with cost-effective solutions. Essential Technical Specs of KCD2-SCD-Ex1-SP are - and operates on a - and - ratings. The device has a 880 ms response time and utilizes basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. It complies with -40 ... 70 °C (-40 ... 158 °F) standards, operates in temperatures from -40 ... 70 °C (-40 ... 158 °F) and has an spring terminals rating. The unit mounts on a 88 mm DIN rail and weighs approximately 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2, with dimensions of CESI 06 ATEX 021 X. Capture the Best Deal with a Quote for your requirement of P&F Spring Terminals Current Drivers. Our pricing and support are designed to exceed the standards of other Traders & Suppliers.
