Pepperl Fuchs UC1000-18GS-IUEP-IO-V15 Ultrasonic Sensor
The Pepperl Fuchs UC1000-18GS-IUEP-IO-V15 Ultrasonic Sensor offers a Cylindrical design, 70 ... 1000 mm sensing range, 1 push-pull output , short-circuit protected , reverse polarity protected and 1 analog output 0 (4) ... 20 mA or, 1 analog output 0 ... 10 V output, and Connector plug M12 x 1 , 5-pin connection. Manufactured by Pepperl Fuchs under the P&F Ultrasonic Sensor category, this model belongs to the diffuse reflective sensor.
| Brand | Pepperl Fuchs |
| Product Type | Ultrasonic Sensor |
| Model Number | UC1000-18GS-IUEP-IO-V15 |
Pepperl Fuchs UC1000-18GS-IUEP-IO-V15 Ultrasonic Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Type of Sensing | Diffuse Reflective |
| Design | Cylindrical |
| Sensing range | 70 ... 1000 mm |
| Adjustment range | 90 ... 1000 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 255 kHz |
| Response delay | minimum : 28 ms, factory setting: 56 ms |
| LED green | solid: power on, flashing: standby mode or IO-Link communication |
| LED yellow 1 | solid: object in evaluation range, flashing: switch point programming, object detected |
| LED yellow 2 | - |
| LED red | solid: error, flashing: switch point programming, object not detected |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Output type | 1 push-pull output , short-circuit protected , reverse polarity protected and 1 analog output 0 (4) ... 20 mA or, 1 analog output 0 ... 10 V |
| Default setting | - |
| Repeat accuracy | ≤ ± 0.1 % of full-scale value |
| Switching frequency | factory setting: 10 Hz, programmable to 23 Hz |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Temperature influence | with temperature compensation: ≤ ± 0.75% of the end value 10 min after switching on the sensor (factory setting), with enhanced temperature compensation: ≤ ± 0.75% of the end value 2 min after switching on the sensor, without temperature compensation: 0.17 %/K |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013 |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP67 |
| Material Housing | stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT, plastic parts |
IndMALL Automation Dealing offers P&F Analog Diffuse Reflective Sensor UC1000-18GS-IUEP-IO-V15 at unbeatable prices. The Main Technical Parameters of UC1000-18GS-IUEP-IO-V15 features Diffuse Reflective, Cylindrical design with a sensing range of 70 ... 1000 mm and an adjustment range of 90 ... 1000 mm. It has a dead band of 0 ... 70 mm and uses a standard target plate of 100 mm x 100 mm. The transducer frequency is approximate approx. 255 kHz, and the response delay of minimum : 28 ms, factory setting: 56 ms. Operating at 10 ... 30 V DC , ripple 10 %SS, the sensor includes 1 push-pull output , short-circuit protected , reverse polarity protected and 1 analog output 0 (4) ... 20 mA or, 1 analog output 0 ... 10 V. It offers repeat accuracy of ≤ ± 0.1 % of full-scale value, a switching frequency of factory setting: 10 Hz, programmable to 23 Hz, range hysteresis of 1 % of the adjusted operating range (default settings), programmable , min. 1 mm, and a temperature influence of with temperature compensation: ≤ ± 0.75% of the end value 10 min after switching on the sensor (factory setting), with enhanced temperature compensation: ≤ ± 0.75% of the end value 2 min after switching on the sensor, without temperature compensation: 0.17 %/K. The sensor operates in ambient temperatures from -25 ... 70 °C (-13 ... 158 °F) and can be stored in temperatures from -40 ... 85 °C (-40 ... 185 °F). It feature Connector plug M12 x 1 , 5-pin, an IP67 protection rating, and an stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT, plastic parts housing. Take the First Step with a Quote for your P&F Analog Diffuse Reflective Sensor requirement. Choose us for unparalleled pricing and support over other Dealers & Distributors.
