Phoenix PLC-RSC-230AC/21-21/SO46/HI (1079387) | Get A Quote
+91 79955 44066 sales@indmall.in

PLC-RSC-230AC/21-21/SO46/HI: 1079387 - Phoenix 230V AC Input Relay

Technical Specifications of Phoenix 230V AC Input Relay PLC-RSC-230AC/21-21/SO46/HI 1079387:

SpecValue
Product typeRelay Module
Nominal input voltage UN230 V AC
Connection methodScrew connection
Mounting typeDIN rail mounting

Phoenix 30A, 12V DC Voltage Relay PLC-RSC- 12DC/ 1IC/ACT, 1078800 Technical Specifications:

SpecificationValue
Product typeRelay Module
Product familyPLC-INTERFACE
ApplicationFilter to prevent interference
Mechanical service life3x 107 cycles
InsulationBasic insulation
Overvoltage categoryIII
Pollution degree2
Maximum power dissipation for nominal condition1.04 W
Test voltage (Winding/contact)4 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage4 kV
Nominal input voltage UN230 V AC
Input voltage range190 V AC ... 264 V AC (20 °C)
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN14 mA (50 Hz)
Typical response time10 ms
Typical release time8 ms
Protective circuitBridge rectifier
Operating voltage displayYellow LED
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current6 A
Maximum inrush current15 A (300 ms)
Min. switching current10 mA (5 V)
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
Switching capacity2 A (at 24 V, DC13)
Connection methodScrew connection
Stripping length8 mm
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Width14 mm
Height80 mm
depth94 mm
Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Degree of protection (Relay)RT III (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Ambient temperature (operation)-40 °C ... 50 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board
Low Voltage DirectiveConformance with Low Voltage Directive
Electromagnetic compatibilityConformance with EMC directive
Standards/regulationsIEC 60947-5-1
Mounting TypeDIN rail mounting
Mounting positionany
Contact Connection type-
Output fuse-
Degree of protection (Installation location)≥ IP54 (Installation location)
Mail Us for Phoenix 230V AC Input Relay PLC-RSC-230AC/21-21/SO46/HI part no: 1079387 at the lowest pricing. Technical Specs Summary of PLC-RSC-230AC/21-21/SO46/HI, 1079387 are Relay Module type and PLC-INTERFACE Product family a versatile solution for Filter to prevent interference applications. This relay module features a mechanical service life of 3x 107 cycles, ensuring durability and reliability. With a maximum power dissipation of 1.04 W, it operates efficiently at a nominal input voltage of 230 V AC, within an input voltage range of 190 V AC ... 264 V AC (20 °C). The module has a typical input current of 14 mA (50 Hz) at UN, with a response time of 10 ms and a release time of 8 ms. It is equipped with a Bridge rectifier for protection and includes 2 changeover contacts made from Screw connection Connection method. Navigate Your Needs with a Quote for your requirement of Phoenix 230V AC Input Relay. We excel in offering more cost-effective and supportive solutions than other Competitors.