Pepperl Fuchs M100/MV100-RT/76a/103/115 Thru Beam Sensor
The technical specifications for the M100/MV100-RT/76a/103/115 are as follows:
- Type of Photoelectric Sensor: Through Beam
- Sensing Distance: 10 meters
- Output Configuration: PNP
- Operating Voltage: 10-30 VDC
- Light Source: Visible Red Light
- Switching Frequency: 1000 Hz
- Connection Method: 2 Meter Cable Type
Original price was: ₹10,000.00.₹5,000.00Current price is: ₹5,000.00.
Available on backorder
Pepprl Fuchs M100/MV100-RT/76a/103/115 Technical Specifications:
Pepperl Fuchs M100/MV100-RT/76a/103/115 sensor does not have a detection range of 0 to 10m. The maximum detection range for this sensor is 60m. If you need a sensor with a detection range of 0 to 10m and a PNP output,
| Emitter | M100-RT/76a/115 | |
| Receiver | MV100-RT/103/115 | |
| Effective detection range | 0 … 10 m | |
| Threshold detection range | 15 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Diameter of the light spot | approx. 1 m at a distance of 15 m | |
| Angle of divergence | approx. 2 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2 | |
| MTTFd | 860 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) | |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) | |
| Housing width | 11 mm | |
| Housing height | 31 mm | |
| Housing depth | 20 mm | |
| Degree of protection | IP67 | |
| Connection | 2 m fixed cable | |
| Mass | approx. 100 g (emitter and receiver) | |
| Tightening torque, fastening screws | 0.6 Nm | |
| Cable length | 2 m | |
Product Documentation: M100/MV100-RT/76a/103/115
Here is the main technical specification of Pepperl Fuchs Photoelectric Sensor M100/MV100-RT/76a/103/115: Through Beam, Sensing: 10m, PNP, Visible Red Light, Cable Type.
If you want to know all ranges of Pepperl Fuchs photo sensors you can check.
Related Products: M100/MV100-RT/76a/103/115
OBT200-18GM60-E5
Type: Diffuse-type Sensor, Light source: IRED (Infrared), 880 nm, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, Detection range: 0 … 200 mm, Switching type: Light/dark-on, electrically switchable, Switching frequency: 500 Hz, Response time: 1 ms, Housing dimensions (WxHxD): Not specified, Connection: 2 m fixed cable, Housing material: Brass, nickel-plated, Cable length: 2 m, Operating voltage: 10 … 30 V DC, Degree of protection: IP67.
OBT500-18GM60-E5
Type: Diffuse Type PhotoSensor, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, Light source: IRED (Infrared), 880 nm, Detection range: 0 … 500 mm, Switching type: Light/dark-on, electrically switchable, Switching frequency: 500 Hz, Response time: 1 ms, Degree of protection: IP67, Connection: 2 m fixed cable, Housing material: Brass, nickel-plated, Cable length: 2 m, Operating voltage: 10 … 30 V DC.
OBT300-R100-2EP-IO-V31-L
Type: Triangulation PhotoSensor, Housing (WxHxD): 11 mm x 44.5 mm x 21.5 mm, Switching type: Light-on/dark-on electrically switchable, Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected, Detection range: 7 … 300 mm, Light source: Laser diode, modulated visible red light, Operating voltage: 10 … 30 V DC, Degree of protection: IP67 / IP69 / IP69K, Connection: M8 x 1 connector, 4-pin, Housing material: PC (Polycarbonate).
ML100-8-H-350-RT/103/115
Type: Background suppression PhotoSensor, Switching type: Adjustable, default setting: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, Switching frequency: 500 Hz, Response time: 1 ms, Housing (WxHxD): 11 mm x 31 mm x 20 mm, Degree of protection: IP67, Detection range: 5 … 350 mm, Light source: LED, modulated visible red light, Operating voltage: 10 … 30 V DC, Connection: 2 m fixed cable, Housing material: PC (Polycarbonate), Cable Length: 2 m.
OBP120-R100-2EP-IO-V31-L
Type: Trigger Marks Sensor PhotoSensor, Light source: Laser diode, modulated visible red light, Detection range: 25 … 120 mm, Operating voltage: 10 … 30 V DC, Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected, Switching frequency: 3300 Hz, Switching type: Adjustable switching type, default setting: light-on, Response time: 125 µs, Housing (WxHxD): 11 mm x 44.5 mm x 21.5 mm, Connection: M8 x 1 connector, 4-pin, Housing material: PC (Polycarbonate), Degree of protection: IP67 / IP69 / IP69K.
