Omron TL-Q5MC1 2M Proximity Sensor
Omron TL-Q5MC1 2M is a rectangular unshielded proximity sensor with a 5 mm sensing distance and a 0 to 4 mm setting distance. It uses a DC 3-wire NPN output with NO operation, a pre-wired 2 m cable, and a 12 to 24 VDC power supply. Ferrous metal is the specified detectable object, with an iron 15 × 15 × 1 mm standard sensing object. Response frequency is 500 Hz, current consumption is 10 mA max. at 24 VDC, and differential travel is 10% max. of sensing distance. A red detection indicator and IEC IP67 protection are specified. The TL-Q5MC1 2M is listed under rectangular proximity sensors from Omron sensor products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | TL-Q5MC1 2M |
Omron TL-Q5MC1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Rectangular |
| Mounting | Unshielded |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output Configuration | DC 3-wire, NPN |
| Operation Mode | NO |
| Connection | Pre Wired Cable Length 2M |
| Power Supply Voltage | 12 to 24 VDC. |
| Standard Target | Iron, 15 × 15 × 1 mm |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 500 Hz |
| Current Consumption | 10 mA max. at 24 VDC |
| Indicator | Detection indicator (red) |
| Protection Circuit | Reverse polarity protection, Surge suppressor |
| Ambient Temperature Range | Operating/Storage: −25 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±20% max. of sensing |
| Dielectric Strength | 5 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 200 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range |
| Degree Of Protection | IEC IP67 |
| Weight | Approx. 90 g |
The Omron TL-Q5MC1 2M Proximity Sensor uses a rectangular, unshielded sensing body with a 5 mm sensing distance and a 0 to 4 mm setting distance. It is configured with a DC 3-wire NPN output and NO operation, using a pre-wired 2 m cable on a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, with an iron 15 × 15 × 1 mm standard sensing object. Response frequency is 500 Hz, current consumption is 10 mA max. at 24 VDC, and differential travel is 10% max. of sensing distance. A red detection indicator is provided together with reverse-polarity protection and surge suppression.
The TL-Q5MC1 is specified for operation and storage from -25 to 70°C without icing or condensation, with humidity from 35% to 95%. Temperature influence is ±20% max. of sensing distance. Insulation resistance is 5 MΩ min. at 500 VDC, dielectric strength is 500 VAC for 1 minute, and voltage influence is ±2.5% max. within rated voltage ±10%. IEC IP67 is the listed protection level for this rectangular sensor. For another rectangular Omron proximity sensor with a pre-wired 2 m cable and NO operation but a 20 mm sensing distance and DC 2-wire circuit, see TL-N20MD1 2M.
