+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-12024BE Power Supply

Omron S8VS-12024BE SMPS is a 120 W switch mode power supply designed to provide 24 VDC with 5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for integration inside machine control cabinets. Screw terminals and terminal blocks provide fixed wiring points for input and output wiring. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. A green output indicator provides operating status. Within the S8VS Series, the S8VS-12024BE provides a DIN rail 120 W, 24 VDC configuration. Compare other 120W industrial power supplies from Omron machine automation.

Omron S8VS-12024BE Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-12024BE

Omron S8VS-12024BE Power Supply - Technical Specifications

SpecificationValue
Power rating120 W
Output voltage24 VDC
Rated output current5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency83% typ. (at 100 VAC input) 85% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current1.9 A max., 1.5 A typ. (at 100 VAC input) 1.1 A max., 0.72 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time650 ms typ. (at 100 VAC input) 520 ms typ. (at 200 VAC input)
Hold time56 ms typ. (at 100 VAC input) 56 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight550 g max.

The Omron S8VS-12024BE Power Supply provides 120 W rated power with a 24 VDC output and 5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for electrical-cabinet installation. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. These specifications define a 24 VDC supply where connected equipment voltage, combined current demand, incoming source, rail space, and terminal access should be considered together. Connected equipment should require 24 VDC and keep continuous current demand within the rated 5 A output. The mounting and terminal arrangement support fixed installation with other panel components.

The S8VS range includes lower- and higher-power models that use the same 24 VDC nominal output. This makes current capacity the main comparison point after output voltage is confirmed. A 240 W version can provide 10 A for larger loads, while the 120 W unit remains matched to applications within its 5 A rating. Different-voltage models should not be treated as direct substitutes even when their input range and mounting format are similar. For a higher-capacity DIN rail model delivering 24 VDC at 10 A, compare the Omron S8VS-24024AP.