+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G10015C Power Supply

Omron S8FS-G10015C SMPS is a 100 W switch mode power supply designed to provide 15 VDC with a rated output current of 7 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 85% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. A green indicator provides output status during operation. The 15 VDC output distinguishes this model from lower- and higher-voltage configurations in the same power class. Within the S8FS-G Series, the S8FS-G10015C provides a direct-mount 100 W, 15 VDC configuration. Compare other 100W 15V power supplies from Omron industrial automation.

Omron S8FS-G10015C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G10015C

Omron S8FS-G10015C Power Supply - Technical Specifications

SpecificationValue
Power rating100 W
Output voltage15 VDC
Rated output current7 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency85 % typ.(at 100 VAC input) 87 % typ.(at 200 VAC input) 87 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.1 A typ.(at 100 VAC input) 1.2 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time11 ms typ.(at 100 VAC input) 55 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight400 g max.

The Omron S8FS-G10015C Power Supply provides 100 W rated power with a 15 VDC output and 7 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is 85% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. A green output indicator provides operating status. These specifications position the model within the 15 VDC class, where load voltage should be confirmed before current capacity, source compatibility, or mounting arrangement is compared.

The connected equipment should require 15 VDC and remain within the 7 A rated current. Direct mounting determines the physical installation method, while screw terminals provide the input and output wiring interface. When nominal output remains at 15 VDC, a higher-power model can be compared directly according to available current capacity. For a 150 W configuration supplying 15 VDC at 10 A with DIN rail mounting, compare the Omron S8FS-C15015J.