The Omron NJ-PD3001 Machine Automation Controller Power Supply Unit is designed for compatible NJ-Series controller systems operating from a 24 VDC supply. It provides the system power required by supported NJ CPUs and expansion units, including the controller-side power functions described for the DC-powered configuration. This allows control, I/O, and communication units within the compatible NJ architecture to receive operating power from the system power supply. The NJ-PD3001 provides a DC-input power option for NJ controller installations. Its system-power function complements the DC-input PLC power supply range within Omron industrial automation systems.
20 MΩ min.
(at 500 VDC) between DC external and GR terminals
Dielectric Strength
1,000 VAC 50/60 Hz for 1 min between DC external and GR
terminals
Leakage current: 10 mA max.
Noise immunity
2 kV on power supply line (Conforms to IEC 61000-4-4.)
Vibration resistance
5 to 8.4 Hz, 3.5-mm amplitude, 8.4 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions for 100 min (Time coefficient: 10 min ×
coefficient factor 10 = total time 100 min) (according to IEC 60068-2-6)
Shock resistance
147 m/s2 3 times each in X, Y, and Z directions (Relay Output Unit: 100 m/s2) (according to IEC 60068-2-27)
