Omron EE-SX951-C1J-R 0.3M Photomicrosensor
Omron EE-SX951-C1J-R 0.3M is an L-shaped through-beam slot photomicrosensor designed around a fixed 5 mm sensing gap. Its NPN output supports both Light-ON and Dark-ON operation, allowing the switching response to be selected according to the control requirement. The sensor operates from 5 to 24 VDC and consumes 15 mA, while the output supports a maximum load current of 50 mA. A red light indicator provides visual operating status. Electrical connection is provided through a pre-wired connector arrangement with a short 0.3 m robot cable, distinguishing this model from longer cable versions. For compact L-shaped connector installation, the EE-SX951-C1J-R 0.3M sits within the L-shaped photomicrosensor range from Omron Sensor Range.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX951-C1J-R 0.3M |
Omron EE-SX951-C1J-R 0.3M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Type | L-shaped |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Power Supply Voltage | 5 to 24 VDC |
| Control Output (Output Type) | NPN |
| Connection Method | Pre-wired connector model with robot cable 0.3 m |
| Cable Length | 0.3 m |
| Current Consumption | 15 mA |
| Operation Mode | With both Dark-ON and Light-ON |
| Control Output (Residual Voltage) | at 50 mA load current: 0.7 V max. at 5 mA load current: 0.4 V max. |
| Control Output (Load Current) | 50 mA max. |
| Indicator | Light indicator (red) |
| Luminous Method | Non-modulated |
| Ambient Temperature (Operating) | -25 to 55 ℃ |
| Ambient Temperature (Storage) | -30 to 80 ℃ |
| Ambient Humidity (Operating) | 5 to 85 % |
| Ambient Humidity (Storage) | 5 to 95 % |
| Vibration Resistance | Destruction: 10 to 2000 Hz, peak acceleration 150 m/s2, 0.75 mm single amplitude 2.5 h each in X, Y, and Z directions (15 min periods, 10 cycle) |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IP50 |
| Material | Case: Polybutylene terephthalate (PBT) Cover: Polybutylene terephthalate (PBT) Emitter/Receiver: Polycarbonate (PC) |
The Omron EE-SX951-C1J-R 0.3M Photomicrosensor uses an L-shaped body with a fixed 5 mm through-beam sensing slot. Its NPN output supports both Light-ON and Dark-ON operation, providing selectable switching logic for compatible control circuitry. The sensor operates from 5 to 24 VDC and consumes 15 mA. Maximum load current is 50 mA, with residual voltage specified at 0.7 V maximum at 50 mA and 0.4 V maximum at 5 mA. A red light indicator provides visual operating status, while the optical arrangement is non-modulated. Electrical connection is provided through a pre-wired connector model with a short 0.3 m robot cable, giving this version a compact wiring arrangement for closely positioned connection points.
The EE-SX951-C1J-R uses PBT for the case and cover, with polycarbonate specified for the emitter and receiver. Operating temperature extends from -25°C to 55°C, while storage ranges from -30°C to 80°C. Mechanical resistance includes vibration from 10 to 2,000 Hz under the stated test procedure and shock resistance of 500 m/s² along each axis. The enclosure carries an IP50 rating. Its L-shaped body and 0.3 m robot cable distinguish it from the longer pre-wired EE-SX951 variants, while the same 5 mm slot and NPN switching principle are retained. For a related L-shaped version with a longer 1 m robot cable, see the Omron EE-SX951-R 1M.
