The Omron E6C3-CWZ3EH 100P/R 2M Rotary Encoder is an incremental shaft encoder configured for rotational feedback where a 100-pulse resolution meets the machine monitoring requirement. Its 100 P/R resolution with A/B/Z NPN voltage outputs provides incremental movement, direction, and reference information for compatible PLCs, counters, and control equipment. Operating from 5 to 12 VDC, the encoder uses a 50 mm diameter housing with a 2 m pre-wired cable for connection between the shaft and control system. This 100 P/R configuration provides a lower pulse-count alternative to higher-resolution E6C3-CWZ3EH models. The E6C3-CWZ3EH 100P/R belongs to the E6C3-C Series. It sits within the 100 P/R shaft encoder range available through Omron industrial sensing products.
Operating: -10 to 70 ℃ (with no icing)
Storage: -25 to 85 ℃ (with no icing)
Degree of protection
IEC: IP65
Material
Case: Aluminum alloy
Accessories
Instruction manual
The Omron E6C3-CWZ3EH 100P/R 2M is part of the E6C3 Rotary Encoder range and is typically evaluated along with other Omron rotary encoders during panel design and motion control planning. Reviewing shaft type, resolution, output phase coding, control output stage, connector format, and cable arrangement helps ensure proper alignment with PLC high-speed inputs and mechanical coupling components. These compatible Omron encoder variants enable consistent wiring layouts, predictable pulse behaviour, connector alignment, and uniform signal performance across automation equipment. The E6C3-CWZ3EH 100P/R 2M integrates cleanly into modern industrial systems that require accurate, stable, and long-life rotary feedback devices, and is well suited for applications where a dependable Omron Encoders ensures reliable operation in demanding environments.
