The Omron E6A2-CS3C 300P/R 0.5M Rotary Encoder is an incremental shaft encoder configured for compact rotational sensing applications in industrial equipment. It generates 300 P/R through a Phase A NPN output, providing pulse information that compatible control devices can use to monitor rotation or speed. A 25 mm diameter housing gives the encoder a compact mechanical footprint, while the 0.5 m pre-wired cable supports short-distance connection to associated control equipment. The encoder operates from a 5 to 12 VDC supply. Compared with the 100 P/R configuration in the same family, this model provides a higher pulse count per shaft revolution. The E6A2-CS3C 300P/R sits within the E6A2-C Series. It also belongs to the 300 P/R encoder range associated with Omron industrial sensing equipment.
Operating: -10 to 55 ℃ (with no icing)
Storage: -25 to 80 ℃ (with no icing)
Degree of protection
IEC: IP50
Material
Case: Aluminum alloy
Accessories
Instruction manual, Couplings, Hex-head spanner
Weight
Package: Approx. 35 g
The Omron E6A2-CS3C 300P/R 0.5M is part of the E6A2 Rotary Encoder range and is typically evaluated along with other Omron rotary encoders during panel design and motion control planning. Reviewing shaft type, resolution, output phase coding, control output stage, connector format, and cable arrangement helps ensure proper alignment with PLC high-speed inputs and mechanical coupling components. These compatible Omron encoder variants enable consistent wiring layouts, predictable pulse behaviour, connector alignment, and uniform signal performance across automation equipment. The E6A2-CS3C 300P/R 0.5M integrates cleanly into modern industrial systems that require accurate, stable, and long-life rotary feedback devices, and is well suited for applications where a dependable Omron Encoders ensures reliable operation in demanding environments.
