Omron E3ZM-D62 5M Photoelectric Sensor
Omron E3ZM-D62 5M is a diffuse-reflective photoelectric sensor designed for object sensing across a specified distance of 1 m. Its infrared LED directs light toward the target, while the returned optical signal establishes the sensing condition without requiring a separate receiving unit. The NPN output communicates the switching state to compatible industrial control circuitry, while Light-ON and Dark-ON operation supports different switching requirements. The sensor operates from 10 to 30 VDC and includes a 5 m pre-wired cable for extended electrical connection. Current consumption is specified at 25 mA maximum, while response time is 1 ms maximum. The square sensor body uses SUS316L material. Within the E3ZM Series, the E3ZM-D62 5M provides longer fixed wiring within the 1 m diffuse sensor range across Omron Industrial Products.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3ZM-D62 5M |
Omron E3ZM-D62 5M Photoelectric Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Diffuse-reflective |
| Shape | Square type |
| Sensing Distance | 1m |
| Power Supply Voltage | 10 to 30 VDC |
| Output Configuration | NPN |
| Connection Method | Pre-wired cable length 5m |
| Current Consumption | 25 mA max. |
| Light Source (Wavelength) | Infrared LED |
| Operation Mode | Light-ON/Dark-ON |
| Response Time | 1 ms max. |
| Degree Of Protection | IP67 |
| Material | SUS316L |
| Material Lens | Methacrylate resin |
| Weight | 90 g |
The Omron E3ZM-D62 5M Photoelectric Sensor uses diffuse-reflective sensing across a specified distance of 1 m. Its infrared LED directs optical light toward the target, while the returned signal establishes the sensing state without requiring a separate receiver or reflector. The NPN output communicates the switching condition to compatible industrial control circuitry. The sensor operates from 10 to 30 VDC and consumes up to 25 mA. Light-ON and Dark-ON operation supports different control requirements, while response time is specified at 1 ms maximum. A 5 m pre-wired cable provides additional connection length between the sensing position and control equipment. The square sensor body is specified with SUS316L material, while methacrylate resin is listed for the optical section. The longer cable does not change the supplied 1 m optical sensing distance.
For an Omron diffuse-reflective photoelectric sensor requiring NPN output and extended fixed wiring, the relevant model is the E3ZM-D62. Its 10 to 30 VDC operating range and 25 mA maximum current consumption support integration with compatible control inputs. The infrared light source allows object sensing from returned light, keeping the optical arrangement on one side of the target area. The 5 m cable is useful where the control connection is positioned farther from the sensing location, while the stated 1 m sensing distance remains unchanged. Its specifications also support requirements for an Omron 1 m diffuse sensor and Omron pre-wired NPN sensor. For the same model with a shorter 2 m cable, see E3ZM-D62 2M.
