+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron E3Z-D62K 2M Photoelectric Sensor

Omron E3Z-D62K 2M is a diffuse-reflective photoelectric sensor designed for direct object sensing across a specified 300 mm distance. Its 870 nm infrared LED sends light toward the target surface, while the returned optical signal is evaluated by the sensor to establish the switching state. The NPN output supports compatible industrial control equipment, and Light-ON or Dark-ON operation can be selected according to the required logic. The sensor operates from 12 to 24 VDC and includes a 2 m pre-wired cable. Response time is specified at 1 ms maximum, while a one-turn adjuster supports sensitivity setting. Within the E3Z Series, the E3Z-D62K 2M provides the 300 mm NPN configuration for medium-range diffuse sensors across Omron Automation Products.

Omron E3Z-D62K 2M Photoelectric Sensors
BrandOmron
ProductPhotoelectric Sensors
Model NumberE3Z-D62K 2M

Omron E3Z-D62K 2M Photoelectric Sensor – Technical Specifications

SpecificationValue
Sensing MethodDiffuse-reflective
Sensing Distance300 mm
Light SourceInfrared LED (870 nm)
Power Supply Voltage12 to 24 VDC
Output ConfigurationNPN
Connection MethodPre-wired 2 M cable
Current Consumption30 mA max.
Control OutputLoad power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.
Operation ModeLight-ON/Dark-ON selectable
Response TimeOperate or reset: 1 ms max.
Sensitivity AdjustmentOne-turn adjuster
IndicatorsOperation indicator (orange) Stability indicator (green) Through-beam Emitter has power indicator (orange) only.
Ambient IlluminationIncandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient Temperature RangeOperating: −25 to 55°C, Some connector models: −40°C to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient Humidity RangeOperating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation Resistance20 MΩ min. at 500 VDC
Dielectric Strength1,000 VAC, 50/60 Hz for 1 min
Vibration ResistanceDestruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock ResistanceDestruction: 500 m/s2 3 times each in X, Y, and Z directions
Protection CircuitsReversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Degree Of ProtectionIEC, IP67
MaterialPBT (polybutylene terephthalate), Methacrylic resin
WeightApprox. 20 g

The Omron E3Z-D62K 2M Photoelectric Sensor uses diffuse-reflective sensing across a specified 300 mm distance. Its 870 nm infrared LED directs light toward the target surface, and the returned optical signal is evaluated by the sensor without requiring a separate reflector. The NPN output supports a maximum load current of 100 mA and a load supply voltage up to 26.4 VDC. Light-ON or Dark-ON operation can be selected according to the required machine logic. The sensor operates from 12 to 24 VDC and includes a 2 m pre-wired cable. Current consumption is specified at 30 mA maximum, response time at 1 ms maximum, and a one-turn adjuster supports sensitivity setting.

For an Omron diffuse sensor requiring NPN output and the supplied 300 mm working range, the corresponding model is the E3Z-D62K. Ambient-light resistance reaches 3,000 lx under incandescent light and 10,000 lx under sunlight. Operating temperature extends from -25 to 55°C, while storage covers -40 to 70°C without icing or condensation. Reverse supply polarity, output short-circuit, mutual-interference, and reversed-output polarity protection are listed. PBT and methacrylic resin are specified as construction materials. The configuration also matches searches for an Omron 300 mm photoelectric sensor and Omron NPN diffuse sensor. Its direct target-return principle supports installations where reflector mounting is not practical. For an E3Z-D62K version supplied with a 5 m cable and a listed 1 m range, see the E3Z-D62K 5M.