Omron E2E-X6MB1DL8-M1TJ 0.3M Proximity Sensor
Omron E2E-X6MB1DL8-M1TJ 0.3M uses an M8 unshielded long-body format with 6 mm sensing and DC 3-wire PNP normally open switching. An M12 pre-wired Smartclick connector with a 0.3 m cable provides the electrical connection, while the setting range is 0 to 4.8 mm. Operating voltage spans 10 to 30 VDC with an 800 Hz response frequency. An iron 18 × 18 × 1 mm standard object represents ferrous metals, and IP67 with ISO 20653 is specified. The E2E-X6MB1DL8-M1TJ 0.3M belongs to the E2E NEXT Series, while similar Smartclick versions can be explored through the wider 6 mm PNP proximity sensor range available through Omron Sensing Products for automation systems.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X6MB1DL8-M1TJ 0.3M |
Omron E2E-X6MB1DL8-M1TJ 0.3M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M8 |
| Mounting type | Unshielded |
| Sensing Distance | 6 mm |
| Setting Distance | 0 to 4.8 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NO |
| Body Length | Long Body |
| Connection Method | M12 Pre-wired Smartclick Connector 0.3 M Cable |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | Iron, 18 × 18 × 1 mm |
| Response Frequency | 800 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -25 to 70°C |
| Degree of Protection | IEC 60529: IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Stainless (SUS303), Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 55 g |
The Omron E2E-X6MB1DL8-M1TJ 0.3M Proximity Sensor uses an M8 unshielded long-body housing with a 6 mm sensing distance and a 0 to 4.8 mm setting range. Its DC 3-wire PNP output operates as normally open through an M12 pre-wired Smartclick connector with a 0.3 m cable. Supply voltage is 10 to 30 VDC and response frequency is 800 Hz. An iron 18 × 18 × 1 mm standard object is specified for ferrous metals. Rated output current is 100 mA max. Reverse supply polarity, reverse output polarity, surge, and output short-circuit protection are included. Stainless steel, PBT, nickel-plated brass, zinc-plated iron, and PVC are listed among the materials. Switching status is shown by the orange operation indicator, while the green lamp provides communication status during IO-Link operation.
For applications requiring an Omron M8 proximity sensor with 6 mm sensing, PNP NO switching, long-body mounting, and Smartclick wiring, the specified model is the E2E-X6MB1DL8-M1TJ. Operating and storage temperatures extend from -25 to 70°C, while IEC 60529 IP67 and ISO 20653 are listed. This arrangement also supports Omron PNP proximity sensor, Omron Smartclick proximity sensor, and Omron unshielded proximity sensor requirements. For a related long-body 6 mm PNP NO model using a standard M12 connector instead of the Smartclick lead, see E2E-X6MB1DL8-M1.
