E2E-X4MD2 2M: NC Inductive Proximity Sensor in Chennai
The technical specifications for the Omron E2E-X4MD2 2M NC Inductive Proximity Sensor:
- Sensor Head (Dia): M8 (8mm)
- Installation: Non-Flush/Unshielded
- Sensing Distance: 2 mm
- Connection Method: Pre-wired Models (2m)
- Cable Specifications: PVC (oil-resistant)
- Switching: NC
- Output Configuration: DC 2 Wire
- Response Frequency: 1 kHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X4MD2 2M NC Inductive Proximity Sensor Technical Specification:
| Sensor Head (Dia) | M8 (8mm) |
| Installation | Non-Flush | Unshielded |
| Sensing Distance | 4 mm |
| Connection Method | Pre-wired Models (2 m) |
| Cable Specifications | PVC (oil-resistant) |
| Switching | NC |
| Output Configuration | DC 2 Wire |
| Differential travel | 15% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 20 × 20 × 1 mm |
| Response frequency | 1 kHz |
| Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
| Leakage current | 0.8 mA max |
| Indicator | Operation indicator (red) and setting indicator (green) |
| Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
Are you looking for the Omron E2E-X4MD2 2M NC Inductive Proximity Sensor in Chennai? You’re at the right place. This sensor features an M8 (8mm) head, non-flush unshielded installation, 2 mm sensing distance, comes with 2m pre-wired models, oil-resistant PVC cable, Normally Closed (NC) switching, DC 2 Wire output, 1 kHz response frequency, and operates on 12-24 VDC power. It has a max 15% differential travel and is best for detecting ferrous metal, especially iron-sized 20 × 20 × 1 mm. Get the best prices at IndMALL Automation.