E2E-X4MD1-M3G: Ferrous Metal Proximity Sensor in Chennai
The Omron E2E-X4MD1-M3G Ferrous Metal Proximity Sensor Technical Specifications are:
- Sensor Head (Dia): M8 (8mm)
- Installation: Non-Flush/Unshielded
- Sensing Distance: 4 mm
- Connection Method: M8 Connector Models
- Switching: NO
- Output Configuration: DC 2 Wire
- Response Frequency: 1 kHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X4MD1-M3G Ferrous Metal Proximity Sensor Technical Specification:
Sensor Head (Dia) | M8 (8mm) |
Installation | Non-Flush | Unshielded |
Sensing Distance | 4 mm |
Connection Method | M8 Connector Models |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 20 × 20 × 1 mm |
Response frequency | 1 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Were you looking for the Omron E2E-X4MD1-M3G Ferrous Metal Proximity Sensor in Chennai? You’ve found it. This sensor has an M8 (8mm) head, non-flush unshielded installation, 4 mm sensing distance, M8 connector models, Normally Open (NO) switching, DC 2 Wire output, 1 kHz response frequency, and operates on 12-24 VDC power. It has a max 15% differential travel and is best for sensing iron-sized 20 × 20 × 1 mm. It comes with a red operation indicator and a green setting indicator. Get the best prices at IndMALL Automation.