Omron E2E-X4C112-M1 Proximity Sensor
Omron E2E-X4C112-M1 is an M12 shielded inductive proximity sensor with a 4 mm sensing distance, 0 to 3.2 mm setting distance, and short-body design. It uses a DC 3-wire NPN output with NO operation through an M12 connector and works from 10 to 30 VDC. Ferrous metals are the specified detection targets, with an iron 12 × 12 × 1 mm standard sensing object. Response frequency is 1,000 Hz, and the one-output version is rated up to 200 mA. Reverse-polarity, surge, and output short-circuit protection are specified. The E2E-X4C112-M1 belongs to 4 mm inductive proximity sensors from Omron factory automation sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X4C112-M1 |
Omron E2E-X4C112-M1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M12 |
| Mounting type | Shielded |
| Sensing Distance | 4 mm |
| Setting Distance | 0 to 3.2 mm |
| Output configuration | DC 3-Wire NPN |
| Operation Mode | NO |
| Body Length | Short Body |
| Connection Method | M12 Connector |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | Iron, 12 × 12 × 1 mm |
| Response Frequency | 1,000 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C |
| Degree of Protection | IEC 60529: IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 55 g |
The Omron E2E-X4C112-M1 Proximity Sensor combines an M12 shielded inductive sensing body with a 4 mm sensing distance, a 0 to 3.2 mm setting distance, and short-body construction. It uses a DC 3-wire NPN output with NO operation through an M12 connector and operates from 10 to 30 VDC. Ferrous metals are the specified detection targets, with an iron 12 × 12 × 1 mm standard sensing object. Response frequency is 1,000 Hz. The one-output version supports up to 200 mA, while power-supply reverse polarity, surge suppression, output short-circuit protection, and output reverse polarity are specified. Standard I/O and IO-Link communication modes provide separate operation and communication indication.
Operating and storage conditions for the E2E-X4C112-M1 extend from -40 to 85°C, while IEC 60529 IP67 and ISO 20653 are listed for environmental protection. The shielded M12 design permits mounting near surrounding metal and provides the specified 4 mm sensing distance. Short-body construction helps where rear installation space is limited, and the M12 connector enables detachable cable replacement during servicing. Nickel-plated brass, PBT, zinc-plated iron, and PVC are included among the stated materials. NPN NO switching provides a sinking normally open signal for compatible industrial controls. The supplied comparison data does not specify a dedicated alternative model for this sensor.
