Omron E2E-X18MB2L30-M1TJ 0.3M Proximity Sensor
Omron E2E-X18MB2L30-M1TJ 0.3M is designed for M30 long-body mounting with an 18 mm sensing distance and DC 3-wire PNP normally closed output. The unshielded inductive face provides a 0 to 14.4 mm setting range, while an M12 pre-wired Smartclick connector uses a 0.3 m cable. It operates from 10 to 30 VDC with a 100 Hz response frequency. Current ratings reach 200 mA max. for 1-output models and 100 mA max. for 2-output versions. Review the E2E-X18MB2L30-M1TJ 0.3M among E2E NEXT Series models, then compare other PNP NC proximity sensors available across products from Omron Sensor Products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X18MB2L30-M1TJ 0.3M |
Omron E2E-X18MB2L30-M1TJ 0.3M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting type | Unshielded |
| Sensing Distance | 18 mm |
| Setting Distance | 0 to 14.4 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NC |
| Body Length | Long Body |
| Connection Method | M12 Pre-wired Smartclick Connector 0.3 M Cable |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | Iron, 54 × 54 × 1 mm |
| Response Frequency | 100 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: 35% to 95% |
| Degree of Protection | IEC 60529:IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 170 g |
The Omron E2E-X18MB2L30-M1TJ 0.3M Proximity Sensor uses an M30 unshielded inductive body with an 18 mm sensing distance, 0 to 14.4 mm setting range, and long threaded construction. It provides DC 3-wire PNP normally closed output through an M12 pre-wired Smartclick connector with a 0.3 m cable. The sensor operates from 10 to 30 VDC with a 100 Hz response frequency. Ferrous metals are the specified sensing material, with an iron 54 × 54 × 1 mm standard object. Current ratings reach 200 mA max. for 1-output models and 100 mA max. for 2-output versions. Supply reverse polarity, surge suppression, and output short-circuit protection are included.
IP67 according to IEC 60529 and ISO 20653 are specified for this long-body M30 PNP NC proximity sensor. Nickel-plated brass, PBT, zinc-plated iron, and PVC are among the listed construction materials. For circuits requiring normally closed PNP output together with extended threaded mounting, the E2E-X18MB2L30-M1TJ 0.3M provides an 18 mm sensing range and Smartclick connection. Standard I/O and IO-Link modes use separate indicator behavior.
