Omron E2E-X16MB3D18 2M Proximity Sensor
Omron E2E-X16MB3D18 2M provides both PNP NO and NC switching in an M18 short-body sensor with a 16 mm sensing distance. The unshielded inductive face supports a 0 to 12.8 mm setting range, while the pre-wired 2 m cable provides direct wiring. It operates from 10 to 30 VDC with a 400 Hz response frequency. Reverse-polarity, surge, and output short-circuit protection are specified. Review the E2E-X16MB3D18 2M among E2E NEXT Series models, then compare related PNP NO+NC proximity sensors found across other products from Omron Sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X16MB3D18 2M |
Omron E2E-X16MB3D18 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting type | Unshielded |
| Sensing Distance | 16 mm |
| Setting Distance | 0 to 12.8 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NO+NC |
| Body Length | Short Body |
| Connection Method | Pre-wired 2 M Cable |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 48 × 48 × 1 mm |
| Response Frequency | 400 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C |
| Degree of Protection | IEC 60529: IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC) |
| Weight | Approx. 170 g |
The Omron E2E-X16MB3D18 2M Proximity Sensor uses an M18 unshielded inductive housing with a 16 mm sensing range, 0 to 12.8 mm setting distance, and short-body construction. It provides DC 3-wire PNP NO+NC switching through a pre-wired 2 m cable and runs from 10 to 30 VDC. Ferrous metal is specified as the sensing material, with an iron 48 × 48 × 1 mm standard object. Response frequency is 400 Hz. Current ratings reach 200 mA max. for 1-output versions and 100 mA max. for 2-output versions. Reverse polarity, surge suppression, output short circuit, and output reverse polarity protection are included.
Operating and storage conditions extend from -40 to 85°C, while IP67 according to IEC 60529 and ISO 20653 are specified for this M18 PNP NO+NC proximity sensor. Nickel-plated brass, PBT, zinc-plated iron, and PVC are among the listed construction materials. When both normally open and normally closed PNP signals are required through direct cable wiring, the E2E-X16MB3D18 provides both output states with a 16 mm sensing range. Standard I/O and IO-Link communication use different indicator behavior.
