Omron E2E-X10MB3DL18-M1TJ 0.3M Proximity Sensor
Omron E2E-X10MB3DL18-M1TJ 0.3M is a useful choice where an M18 long-body sensor, 10 mm sensing range, and flexible PNP NO+NC switching are required with quick connector access. Its unshielded inductive face has a 0 to 8 mm setting range, while the M12 pre-wired Smartclick connector with 0.3 m cable simplifies connection changes. The sensor operates from 10 to 30 VDC with a 400 Hz response frequency. Reverse-polarity protection, surge suppression, and output short-circuit protection are specified. View the E2E-X10MB3DL18-M1TJ 0.3M among M18 proximity sensors available from Omron Sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X10MB3DL18-M1TJ 0.3M |
Omron E2E-X10MB3DL18-M1TJ 0.3M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting type | Unshielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NO+NC |
| Body Length | Long Body |
| Connection Method | M12 Pre-wired Smartclick Connector 0.3 M Cable |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 400 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C |
| Degree of Protection | IEC 60529:IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 105 g |
The Omron E2E-X10MB3DL18-M1TJ 0.3M Proximity Sensor uses an M18 unshielded inductive body with a 10 mm sensing distance, 0 to 8 mm setting range, and long threaded construction. Its DC 3-wire PNP output provides NO+NC switching through an M12 pre-wired Smartclick connector with a 0.3 m cable. The sensor operates from 10 to 30 VDC and has a 400 Hz response frequency. Ferrous metals are the specified sensing material, with an iron 30 × 30 × 1 mm standard object. Current ratings reach 200 mA max. for 1-output models and 100 mA max. for 2-output versions. Power-supply reverse polarity, output reverse polarity, surge suppression, and output short-circuit protection are included.
Operating and storage temperatures extend from -40 to 85°C, while IP67 according to IEC 60529 and ISO 20653 are specified. Nickel-plated brass, PBT, zinc-plated iron, and PVC are listed among the construction materials. For users comparing M18 proximity sensors with long-body mounting and flexible output logic, the E2E-X10MB3DL18-M1TJ provides PNP NO+NC switching together with Smartclick wiring and a 10 mm sensing range. Standard I/O and IO-Link modes use separate indicator behavior, helping users identify the active operating mode during setup.
