Omron E2E-X10B1TL30-M1TJ 0.3M Proximity Sensor
Omron E2E-X10B1TL30-M1TJ 0.3M offers 10 mm sensing through an M30 shielded inductive format with a 0 to 8 mm setting range and long-body design. It provides DC 3-wire PNP NO switching through an M12 pre-wired Smartclick connector with a 0.3 m cable and works from 10 to 30 VDC. Response frequency is specified at 400 Hz, while 1-output models support up to 200 mA. Reverse-polarity, surge, and output short-circuit protection are included. Indicator behavior changes between SIO and IO-Link communication modes. See the E2E NEXT Series alongside Smartclick proximity sensors supplied through Omron Automation.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X10B1TL30-M1TJ 0.3M |
Omron E2E-X10B1TL30-M1TJ 0.3M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting type | Shielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NO |
| Body Length | Long Body |
| Connection Method | M12 Pre-wired Smartclick Connector 0.3 M Cable |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 400 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C |
| Degree of Protection | IEC 60529: IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 170 g |
The Omron E2E-X10B1TL30-M1TJ 0.3M Proximity Sensor uses an M30 shielded inductive body with a 10 mm sensing distance, 0 to 8 mm setting range, and long-body format. DC 3-wire PNP NO switching is provided through an M12 pre-wired Smartclick connector with a 0.3 m cable, while operating voltage is 10 to 30 VDC. Ferrous metals are specified as the sensing material, with an iron 30 × 30 × 1 mm standard object. Response frequency is 400 Hz. Output ratings are listed at up to 200 mA for 1-output models and 100 mA for 2-output models, with reverse-polarity, surge, and short-circuit safeguards.
Operating and storage conditions extend from -40 to 85°C, while IP67 according to IEC 60529 and ISO 20653 are specified. Nickel-plated brass, PBT, zinc-plated iron, and PVC are listed in the construction. Where Smartclick connection is required with an M30 long housing, the E2E-X10B1TL30-M1TJ 0.3M provides PNP NO switching and the specified 10 mm sensing distance. Separate indicator behavior is used for SIO and IO-Link operation. For an E2E model with an M18 body, 14 mm sensing distance, and NPN output, see E2E-X14C118-M1.
