Home / Products / Proximity Sensor / Omron / E2E / E2E-C05S01-WC-B1 2M
E2E-C05S01-WC-B1 2M: Micro Inductive Proximity Sensor in Chennai
The technical specifications of Omron E2E-C05S01-WC-B1 2M Micro Inductive Proximity Sensor:
- Sensor Head (Dia): 5.4 dia. (5.4mm)
- Installation: Flush | Shielded
- Sensing Distance: 1 mm
- Connection Method: Pre-wired Models (2 m)
- Switching: NO
- Output: PNP
- Cable specifications: PVC(oil-resistant)
- Response Frequency: 4 kHz
- Power Supply Voltage: 10 to 30 VDC
Omron E2E-C05S01-WC-B1 2M Micro Inductive Proximity Sensor Technical Specification:
| Sensor Head (Dia) | 5.4 dia. (5.4mm) |
| Installation | Flush | Shielded |
| Sensing Distance | 1 mm |
| Connection Method | Pre-wired Models (2 m) |
| Cable Specifications | PVC (oil-resistant) |
| Switching | NO |
| Output | PNP |
| Differential travel | 15% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 5.4 × 5.4 × 1 mm |
| Response frequency | 4 kHz |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)) |
| Current consumption | 10 mA max. |
| Indicator | Operation indicator: Yellow (complies with European standard EN60947-5-2) Lights during output |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Load short-circuit protection. |
| Ambient air temperature | Operation and storage: −25 to 70°C (with no icing or condensation) |
| Ambient humidity | Operation and storage: 35% to 95% (with no condensation) |
| Temperature influence | ±15% max. of sensing distance at 23°C within a temperature range of −25 to 70°C |
| Voltage influence | ±2.5% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Sensing Surface | Heat-resistant ABS |
Are you looking for an Omron E2E-C05S01-WC-B1 2M Micro Inductive Proximity Sensor in Chennai? You’ve found the right place. This sensor has a 5.4mm head, flush shielded installation, 1 mm sensing distance, 2m pre-wired models, Normally Open (NO) switching, PNP output, oil-resistant PVC cable, 4 kHz response frequency, and works with 10-30 VDC power. It has a max 15% differential travel and is best for detecting ferrous metal, especially iron-sized 5.4 × 5.4 × 1 mm. Get the best prices at IndMALL Automation.
