Omron E2B-M12LN05-WP-B2 2M Proximity Sensor
Omron E2B-M12LN05-WP-B2 2M provides a 5 mm sensing range through an M12 cylindrical unshielded body with a 0 to 4 mm setting distance and long housing. It uses DC 3-wire PNP NC output through a pre-wired 2 m cable and works from 10 to 30 VDC. The specified response frequency is 800 Hz, with control output rated 200 mA max. at 32 VDC max. and a maximum 2 V voltage drop. Ferrous metal is the specified sensing object, and a yellow LED shows operating status. Reverse-polarity, surge, and short-circuit protection are included. Explore the E2B-M12LN05-WP-B2 2M with PNP proximity sensors from Omron Sensor Products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2B-M12LN05-WP-B2 2M |
Omron E2B-M12LN05-WP-B2 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Housing Shape | Cylindrical |
| Size | M12 |
| Mounting type | Unshielded |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output configuration | DC, 3-wire, PNP |
| Operation Mode | NC |
| Body Length | Long body |
| Connection Method | Pre-wired 2M Cable |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | 15 × 15 × 1 mm |
| Response Frequency | 800 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient Temperature Range | Operation and storage : -25 to 70ºC |
| Degree of Protection | IP67(IEC60529), EMC (EN60947-5-2) |
| Control Output | 200 mA max. (32 VDC max.), 2 V max. |
| Indicators | Operation indicator (Yellow LED) |
| Materials | Brass-nickel plated, PBT, Standard cable is 4 mm dia. PVC. Brass-nickel plated, Zinc-plated iron. |
| Weight | Approx. 80 g |
The Omron E2B-M12LN05-WP-B2 2M Proximity Sensor provides a 5 mm sensing distance from an M12 cylindrical unshielded body with a 0 to 4 mm setting range. Its long-body construction uses DC 3-wire PNP normally closed switching through a pre-wired 2 m cable, allowing direct wiring without a separate connector. The operating supply is 10 to 30 VDC, and response frequency is specified at 800 Hz. Control output reaches 200 mA max. at 32 VDC max., while voltage drop is limited to 2 V. The listed sensing material is ferrous metal, referenced against a 15 × 15 × 1 mm standard sensing object. A yellow LED indicates operation, with reverse-polarity, surge, and short-circuit protection included.
E2B-M12LN05-WP-B2 is specified for both operation and storage from -25 to 70°C. IP67 according to IEC 60529 is listed together with EMC compliance to EN60947-5-2. Brass-nickel-plated material, PBT, zinc-plated iron, and a standard 4 mm diameter PVC cable are included in the construction details. This configuration suits M12 PNP proximity sensor requirements where 5 mm sensing, normally closed output, long-body mounting, and a fixed 2 m cable are preferred. For an M18 unshielded E2B model with a 10 mm sensing distance, PNP NO output, and M12 connector, see E2B-M18LN10-M1-B1.
