Omron D4A-3114N Limit Switch
Omron D4A-3114N is a general-purpose limit switch with a 7 mm plastic rod actuator for flexible position and presence detection on machinery. The rod actuator can receive contact from varying directions, helping where a rigid plunger would require closer target alignment. Its snap-action mechanism and SPST-NO/SPST-NC contact arrangement provide separate switching paths for general loads, with high inrush capability. IP67 protection and multiple NEMA enclosure ratings support protected machine installations, while operation from -20 to 100°C suits a broad temperature range. The D4A-3114N belongs to the D4A Series within the rod actuator limit switch range from Omron industrial control products for contact, travel, and position sensing.
| Brand | Omron |
| Product | Limit Switch |
| Model Number | D4A-3114N |
Omron D4A-3114N Limit Switch – Technical Specifications
| Specification | Value |
|---|---|
| Shape Structure | General-purpose Limit switches |
| Ctuator | Plastic rod 7 dia. Plastic rod |
| Contact Form | SPST-NO/SPST-NC |
| Load | General load |
| Inrush Current | NC: 30 A max. NO: 20 A max. |
| Ambient Temperature | Operating: -20 to 100 ℃ |
| Ambient Humidity | 35 to 95% RH |
| Pollution Degree | 3 |
| Shock Resistance | Destruction: 1,000 m/s 2 max. |
| Degree Of Protection | IP67 NEMA Type1, 2, 3, 4, 4X, 5, 6P, 12, 13 |
| Contact Resistance Initial Value | 25 mΩ max. |
| Durability | Electrical: 1,000,000 operations min. (10 A at 125 VAC ) |
| Operating Mechanism | Snap action |
The Omron D4A-3114N Limit Switch uses a 7 mm plastic rod actuator for flexible position and presence detection on machinery. The rod can be contacted from different directions, helping accommodate target-path variation where a rigid plunger would require closer alignment. Its snap-action mechanism provides a defined switching response, while the SPST-NO/SPST-NC contact arrangement supplies separate normally open and normally closed paths for general loads. Inrush current capability reaches 30 A maximum on the NC side and 20 A maximum on the NO side. IP67 protection and multiple NEMA enclosure ratings support protected machine installations.
Electrical durability is specified at 1 million operations minimum at 10 A, 125 VAC, while initial contact resistance is 25 mΩ maximum. The D4A-3114N operates from -20 to 100°C with 35 to 95% relative humidity and is listed for pollution degree 3. Destructive shock resistance reaches 1,000 m/s² maximum. The plastic rod actuator provides a different contact geometry from the spring-wire, coil-spring, roller, and plunger options in the same D4A family. It is particularly relevant when the target needs to brush or deflect the actuator rather than make a direct axial push. For a related flexible D4A model using a stainless steel spring-wire rod, see the D4A-3112N model.
