DVP12SE11R: Delta DVP12SE PLC
The Technical Specifications of Delta DVP12SE PLC DVP12SE11R:
- Series: DVP-SE Series PLC
- Power Supply Voltage: 24 VDC (-15 to 20%)
- Data register: 12k words
- Output Method: Relay
- Operating Temperature: 0°C ~ 55°C
- Program Capacity: 16k Steps
- Number of Inputs and Type: 8 - Digital
- Number of Outputs and Type: 8 - Relay
- Power consumption: 1.8 W
Delta DVP12SE PLC DVP12SE11R Technical Specifications:
| Output Type | Relay |
| Power supply voltage | 24 VDC (-15 to 20%) |
| Inrush current | Max. 7.5A@24VDC |
| Power consumption | 1.8 W |
| Number of Inputs and Type | 8 – Digital |
| Number of Outputs and Type | 4 – Relay |
| Power protection | With counter-connection protection on the polarity of DC input power |
| pike Voltage Durability | 1500VAC (Primary-secondary); 1500VAC (Primary-PE); 500VAC (Secondary-PE) |
| Insulation Impedance | >5 MΩ (all I/O point-to-ground: 500VDC) |
| Noise Immunity | ESD: 8 kV Air Discharge EFT: Power Line, 2 kV Digital I/O: 1 kV Analog & Communication I/O |
| Earth | The diameter of the grounding wire shall not be shorter than that of the power supply cable. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
| Storage /Operation Temperature | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Storage /Operation humidity | 5%~95% (humidity) 5%~95% (humidity); pollution degree 2 |
| Max. Input Frequency | 100 kHz |
| Max. Output Frequency | 1 Hz |
| Input impedance | 4.7kΩ |
| Response Time | Approx.10 ms |
| Weight (g) | 82.5g |
Searching for the Delta DVP12SE PLC DVP12SE11R? It’s from the DVP-SE Series and needs a 24 VDC power supply. With a 12k word data register and relay output, it operates between 0°C and 55°C. This PLC can handle 16k steps in programming, has 8 digital inputs, 8 relay outputs, and uses only 1.8 W power. For the best Delta PLC prices, IndMALL Automation is the place to check.