Omron E2A-M30KN20-WP-C1 2M Proximity Sensor
Omron E2A-M30KN20-WP-C1 2M has an M30 cylindrical unshielded sensing body rated for a 20 mm inductive sensing distance and 0 to 16 mm setting range. The short-body model uses DC 3-wire NPN NO output through a pre-wired 2 m cable and accepts a 12 to 24 VDC supply. Its response frequency is 100 Hz, and control output is specified at 200 mA max. at 32 VDC max. with a 2 V max. voltage drop. A yellow LED indicates operation, while reverse-polarity, surge, and short-circuit protection support the electrical circuit. View the E2A-M30KN20-WP-C1 2M among 20 mm proximity sensors from Omron Sensor Products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2A-M30KN20-WP-C1 2M |
Omron E2A-M30KN20-WP-C1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Housing Shape | Cylindrical |
| Size | M30 |
| Mounting type | Unshielded |
| Sensing Distance | 20 mm |
| Setting Distance | 0 to 16 mm |
| Output configuration | DC, 3-wire, NPN |
| Operation Mode | NO |
| Body Length | Short body |
| Connection Method | Pre-wire 2M Cable |
| Response Frequency | 100 Hz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient Temperature Range | Operating: −40° C to 70° C, Storage: −40° C to 85° C |
| Degree of Protection | IP67 after IEC 60529, IP69k after DIN 40050, EMC after EN60947-5-2 |
| Control Output | 200 mA max. (32 VDC max.), 2 V max. |
| Indicators | Operation indicator (Yellow LED) |
| Materials | Brass-nickel plated or stainless stee, PBT, Standard cable is PVC dia 4mm. For other cable materials or diameters please refer to chapter 'Connectivity' brass-nickel plated for brass models stainless steel for steel models |
| Weight | Approx. 280 g |
The Omron E2A-M30KN20-WP-C1 2M Proximity Sensor is built with an M30 cylindrical unshielded inductive sensing face rated for 20 mm detection and a 0 to 16 mm setting distance. The short-body configuration uses DC 3-wire NPN normally open switching through a pre-wired 2 m cable. The sensor operates from 12 to 24 VDC and responds at 100 Hz. Control output is specified at 200 mA max. at 32 VDC max. with a maximum 2 V voltage drop. A yellow LED shows operation. Reverse-polarity protection for the output and power circuits is accompanied by surge suppression and short-circuit protection. This version is intended for direct cable connection rather than detachable connector wiring.
Environmental specifications cover -40 to 70°C operation and -40 to 85°C storage. The E2A-M30KN20-WP-C1 has IP67 protection according to IEC 60529 and IP69K according to DIN 40050, while EMC is stated to EN60947-5-2. Brass-nickel-plated or stainless-steel housing options and PBT components are listed. The M30 unshielded construction provides the stated 20 mm sensing distance within a short housing. For the same M30 size, 20 mm sensing range, pre-wired 2 m cable, and NPN output but with normally closed operation, see E2A-M30KN20-WP-C2 2M.
