Omron EE-SX952-W 3M Photomicrosensor
Omron EE-SX952-W 3M is an F-shaped through-beam slot photomicrosensor designed with a fixed 5 mm sensing gap and an extended 3 m standard cable. The NPN output supports both Light-ON and Dark-ON modes, allowing the switching logic to match the control requirement. Operating power is supplied from 5 to 24 VDC, while current consumption is specified at 15 mA. The output supports up to 50 mA load current, and a red light indicator provides visual operating status. Its non-modulated optical arrangement retains the same sensing principle as the shorter cable version while providing additional wiring reach. For longer-cable F-shaped installation, the EE-SX952-W 3M belongs to the through-beam slot sensor range across Omron sensing solutions.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX952-W 3M |
Omron EE-SX952-W 3M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Type | F-shaped |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Power Supply Voltage | 5 to 24 VDC |
| Control Output (Output Type) | NPN |
| Connection Method | Pre-wired model with standard cable 3 m |
| Cable Length | 3 m |
| Current Consumption | 15 mA |
| Operation Mode | With both Dark-ON and Light-ON |
| Control Output (Residual Voltage) | at 50 mA load current: 0.7 V max. at 5 mA load current: 0.4 V max. |
| Control Output (Load Current) | 50 mA max. |
| Indicator | Light indicator (red) |
| Luminous Method | Non-modulated |
| Ambient Temperature (Operating) | -25 to 55 ℃ |
| Ambient Temperature (Storage) | -30 to 80 ℃ |
| Ambient Humidity (Operating) | 5 to 85 % |
| Ambient Humidity (Storage) | 5 to 95 % |
| Vibration Resistance | Destruction: 10 to 2000 Hz, peak acceleration 150 m/s2, 0.75 mm single amplitude 2.5 h each in X, Y, and Z directions (15 min periods, 10 cycle) |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IP50 |
| Material | Case: Polybutylene terephthalate (PBT) Cover: Polybutylene terephthalate (PBT) Emitter/Receiver: Polycarbonate (PC) |
The Omron EE-SX952-W 3M Photomicrosensor uses an F-shaped body with a fixed 5 mm through-beam sensing slot and an extended 3 m standard cable. The NPN output supports both Light-ON and Dark-ON operating modes, allowing the switching logic to match the connected control system. The sensor operates from 5 to 24 VDC and consumes 15 mA. Maximum load current is specified at 50 mA, while residual voltage is 0.7 V maximum at a 50 mA load and 0.4 V maximum at 5 mA. A red light indicator provides visual operating status, and the non-modulated optical arrangement establishes the sensing point across the F-shaped opening.
The EE-SX952-W uses PBT for the case and cover together with polycarbonate emitter and receiver sections. Operating temperature ranges from -25°C to 55°C, with storage specified from -30°C to 80°C. The stated mechanical ratings include vibration from 10 to 2,000 Hz and shock resistance of 500 m/s² under the listed procedures. The enclosure carries an IP50 rating. Compared with the 1 m version, this model retains the same 5 mm slot, NPN output, selectable Light-ON or Dark-ON modes, and standard pre-wired format while increasing cable length to 3 m. For a shorter fixed-wiring installation using the same configuration, see the Omron EE-SX952-W 1M.
