Omron EE-SX952-W 1M Photomicrosensor
Omron EE-SX952-W 1M is an F-shaped through-beam slot photomicrosensor with a fixed 5 mm sensing gap and a standard 1 m pre-wired cable. Its NPN output supports both Light-ON and Dark-ON operation, allowing the switching response to be selected according to the connected control circuit. The sensor operates from 5 to 24 VDC and consumes 15 mA, while the output supports a maximum load current of 50 mA. A red light indicator provides visual operating status, and the optical arrangement is non-modulated. Its F-shaped geometry provides a defined mounting orientation while the standard cable supports fixed wiring routes. Within the EE Series, the EE-SX952-W 1M supports the F-shaped slot sensor range from Omron sensing products.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX952-W 1M |
Omron EE-SX952-W 1M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Type | F-shaped |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Power Supply Voltage | 5 to 24 VDC |
| Control Output (Output Type) | NPN |
| Connection Method | Pre-wired model with standard cable 1 m |
| Cable Length | 1 m |
| Current Consumption | 15 mA |
| Operation Mode | With both Dark-ON and Light-ON |
| Control Output (Residual Voltage) | at 50 mA load current: 0.7 V max. at 5 mA load current: 0.4 V max. |
| Control Output (Load Current) | 50 mA max. |
| Indicator | Light indicator (red) |
| Luminous Method | Non-modulated |
| Ambient Temperature (Operating) | -25 to 55 ℃ |
| Ambient Temperature (Storage) | -30 to 80 ℃ |
| Ambient Humidity (Operating) | 5 to 85 % |
| Ambient Humidity (Storage) | 5 to 95 % |
| Vibration Resistance | Destruction: 10 to 2000 Hz, peak acceleration 150 m/s2, 0.75 mm single amplitude 2.5 h each in X, Y, and Z directions (15 min periods, 10 cycle) |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IP50 |
| Material | Case: Polybutylene terephthalate (PBT) Cover: Polybutylene terephthalate (PBT) Emitter/Receiver: Polycarbonate (PC) |
The Omron EE-SX952-W 1M Photomicrosensor uses an F-shaped through-beam optical arrangement across a fixed 5 mm sensing slot. Its NPN output supports both Light-ON and Dark-ON modes, allowing the switching response to be selected for compatible control circuitry. The sensor operates from 5 to 24 VDC and consumes 15 mA. Maximum load current is 50 mA, while residual voltage is specified at 0.7 V maximum at 50 mA and 0.4 V maximum at 5 mA. A red light indicator provides operating status, and the optical arrangement is non-modulated. A standard 1 m pre-wired cable provides the electrical connection, distinguishing this version from the robot-cable EE-SX952-R configuration.
The EE-SX952-W uses PBT for the case and cover, with polycarbonate specified for the emitter and receiver sections. Its operating temperature range is -25°C to 55°C, while storage extends from -30°C to 80°C. Mechanical resistance includes vibration from 10 to 2,000 Hz under the stated conditions and shock resistance of 500 m/s² along each axis. The enclosure is rated IP50. Its F-shaped body, NPN output, selectable switching modes, and standard cable suit fixed machine wiring where repeated cable movement is not required. For the same F-shaped sensing arrangement with additional standard cable length, refer to the Omron EE-SX952-W 3M.
