Omron E3Z-LS86-UL Photoelectric Sensor
Omron E3Z-LS86-UL is a distance-settable photoelectric sensor specified with an FGS incident-threshold setting from 40 min. to 200 min. Its 670 nm red LED provides the optical source, while the PNP output communicates the switching state to compatible machine-control circuitry. Selectable Light-ON and Dark-ON operation supports different control requirements. The sensor operates from 12 to 24 VDC and uses an M8 4-pin connector for electrical integration. Current consumption is specified at 30 mA maximum, while response time is 1 ms maximum. A 5-turn endless adjuster supports setting control during installation. Within the E3Z Series, the E3Z-LS86-UL provides PNP connector wiring within the distance-settable optical sensor range across Omron Industrial Sensor Products.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3Z-LS86-UL |
Omron E3Z-LS86-UL Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Distance-settable |
| Sensing Distance | 40 min. to 200 min. Incident threshold (FGS setting) |
| Light Source | Red LED (670 nm) |
| Power Supply Voltage | 12 to 24 VDC, Class 2 |
| Output Configuration | PNP |
| Connection Method | M8 (4-pin) Connector |
| Current Consumption | 30 mA max. |
| Control Output | Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. (residual voltage 1 V max.), Open collector output (NPN or PNP depending on model) |
| Operation Mode | Light-ON/Dark-ON selectable |
| Response Time | Operate or reset: 1 ms max. |
| Sensitivity Adjustment | 5-turn endless adjuster |
| Indicators | Operation indicator (orange), Stability indicator (green) |
| Ambient Illumination | Incandescent lamp: 3,000 lx max.; Sunlight: 10,000 lx max. |
| Ambient Temperature Range | Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | 20 MΩ min. at 500 VDC |
| Dielectric Strength | 1,000 VAC at 50/60 Hz for 1 minute |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Protection Circuits | Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention |
| Degree Of Protection | IP67 (IEC 60529) |
| Weight | Approx. 20 g |
The Omron E3Z-LS86-UL Photoelectric Sensor is a distance-settable PNP model with an FGS incident-threshold setting specified from 40 min. to 200 min. A 670 nm red LED provides the optical source, while the output communicates the switching state to compatible industrial control circuitry. The sensor operates from 12 to 24 VDC and consumes up to 30 mA. Load supply voltage is specified up to 26.4 VDC, with load current up to 100 mA and residual voltage of 1 V maximum. Light-ON or Dark-ON operation can be selected, while operate or reset time is specified at 1 ms maximum. A 5-turn endless adjuster provides setting control, and an M8 4-pin connector provides the electrical interface.
For an Omron distance-settable photoelectric sensor requiring PNP output and connector wiring, the relevant model is the E3Z-LS86-UL. Operating temperature is specified from -25 to 55°C, with storage from -40 to 70°C under the stated conditions. Reversed power-supply polarity protection, output short-circuit protection, and mutual-interference prevention are included. Ambient-light resistance reaches 3,000 lx for incandescent illumination and 10,000 lx for sunlight. Because the supplied information describes an FGS incident-threshold setting rather than a conventional sensing-distance range, no additional distance value has been assumed. For a related PNP connector model with a conventional 20 to 200 mm sensing range, see E3Z-LS86.
