Omron E3Z-LS63 0.5M Photoelectric Sensor
Omron E3Z-LS63 0.5M is a distance-setting photoelectric sensor designed for object sensing across a specified 20 to 80 mm range. Its 670 nm red LED provides the optical source, while the NPN output communicates the switching state to compatible machine-control circuitry. Selectable Light-ON and Dark-ON operation supports different control requirements. The sensor operates from 12 to 24 VDC and includes a 0.5 m pre-wired cable for short fixed wiring. Current consumption is specified at 30 mA maximum, while response time is 1 ms maximum. Within the E3Z Series, the E3Z-LS63 0.5M provides close-range sensing within the 80 mm distance-setting sensor range across Omron Industrial Sensors.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3Z-LS63 0.5M |
Omron E3Z-LS63 0.5M Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Distance-setting |
| Shape | Square type |
| Sensing Distance | 20 to 80 mm |
| Power Supply Voltage | 12 to 24 VDC |
| Output Configuration | NPN |
| Connection Method | Pre Wired Cable, 0.5m Length |
| Current Consumption | 30 mA max. |
| Light Source (Wavelength) | Red LED (670 nm) |
| Operation Mode | Light-ON/Dark-ON selectable |
| Response Time | 1 ms max. |
| Degree Of Protection | IEC: IP67 |
| Material | Polybutylene terephthalate (PBT) |
| Material Lens | Denatured Polyarylate |
| Features | Transparent detection |
| Weight | 65g |
The Omron E3Z-LS63 0.5M Photoelectric Sensor uses distance-setting sensing across a specified 20 to 80 mm range. A 670 nm red LED provides the optical source, while the NPN output sends the switching state to compatible industrial control circuitry. The sensor operates from 12 to 24 VDC and consumes up to 30 mA. Light-ON or Dark-ON operation can be selected according to the required switching sequence, while response time is specified at 1 ms maximum. A 0.5 m pre-wired cable provides the electrical connection. The short cable configuration can suit installations where the sensor is positioned close to a junction point or control enclosure. PBT is listed for the case, while denatured polyarylate is specified for the optical section.
For an Omron distance-setting photoelectric sensor requiring NPN output and close-range sensing, the relevant model is the E3Z-LS63. The stated 20 to 80 mm range establishes the available target position for this version, while the 12 to 24 VDC supply supports compatible machine-control circuits. Its selectable output logic also allows the switching condition to be matched to the control requirement. The model therefore suits requirements for an Omron NPN photoelectric sensor, Omron 80 mm distance sensor, and short pre-wired photoelectric sensor. For another E3Z-LS63 configuration using a 2 m cable with a separately specified 2 to 80 mm BGS range, see E3Z-LS63 2M.
