Omron E3Z-G62 2M Photoelectric Sensor
Omron E3Z-G62 2M is a grooved photoelectric sensor with a fixed 25 mm sensing gap for opaque targets as small as 1.5 mm in diameter. Its 940 nm infrared LED creates the optical path across the groove, while the NPN output transfers the switching state to compatible machine-control equipment. Selectable Light-ON and Dark-ON operation supports different control requirements. The sensor operates from 12 to 24 VDC and includes a 2 m pre-wired cable. Current consumption is specified at 40 mA maximum, while response time is 1 ms maximum. An orange operation indicator provides visual status information during use. Within the E3Z Series, the E3Z-G62 2M provides fixed-gap sensing for NPN grooved sensors across Omron Sensing Products.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3Z-G62 2M |
Omron E3Z-G62 2M Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Grooved type |
| Sensing Distance | 25 mm |
| Standard Sensing Object | Opaque, 1.5-mm dia. min. |
| Light Source | Infrared LED (940 nm) |
| Power Supply Voltage | 12 to 24 VDC |
| Output Configuration | NPN |
| Connection Method | Pre-wired 2 M cable |
| Current Consumption | 40 mA max. |
| Control Output | Load power supply voltage: 26.4 VDC max. Load current: 100 mA max. (Residual voltage: 1 V max.) |
| Operation Mode | Light-ON/Dark-ON selectable |
| Response Time | Operate or reset: 1 ms max. |
| Indicators | Operation indicator (orange) |
| Ambient Illumination | Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
| Ambient Temperature Range | Operating: −25 to 55°C, Storage: −40 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | 20 MΩ min. at 500 VDC between lead wires and case |
| Dielectric Strength | 1,000 VAC, 50/60 Hz for 1 min between lead wires and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
| Protection Circuits | Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference prevention |
| Degree Of Protection | IP64 (IEC 60529) |
| Material | ABS (Acrylonitril Butadiene Styrene) |
| Weight | Approx. 65 g |
The Omron E3Z-G62 2M Photoelectric Sensor uses a grooved sensing arrangement with a fixed 25 mm gap for opaque targets as small as 1.5 mm in diameter. Its 940 nm infrared LED establishes the optical path across the groove, while the NPN output supports a load supply voltage up to 26.4 VDC and a load current up to 100 mA. Light-ON or Dark-ON operation can be selected according to the required machine sequence. The sensor operates from 12 to 24 VDC and includes a 2 m pre-wired cable. Current consumption is specified at 40 mA maximum, while operate or reset time is 1 ms maximum. An orange operation indicator provides visual switching information during machine operation.
For an Omron grooved sensor requiring NPN output and a fixed 25 mm sensing position, the applicable model is the E3Z-G62. Ambient-light resistance is specified at 3,000 lx under incandescent light and 10,000 lx under sunlight. Operating temperature extends from -25 to 55°C, while storage covers -40 to 70°C without icing or condensation. Reverse supply polarity, output short-circuit, and mutual-interference protection are listed. ABS is specified as the housing material, while IP64 enclosure protection is stated. Its configuration also suits searches for an Omron 25 mm NPN sensor and Omron grooved photoelectric sensor. For an E3Z-G62 version using an M8 4-pin connector instead of a fixed cable, see the E3Z-G62-M3J.
