Omron E3T-FT14 2M Photoelectric Sensor
Omron E3T-FT14 2M is an ultrathin through-beam photoelectric sensor designed for object sensing across a maximum distance of 500 mm. A red LED establishes the sensing path between the emitter and receiver, while the PNP output communicates the switching state to compatible industrial control circuitry. Dark-ON operation defines the specified output behavior, and operate or reset time is 1 ms max. The sensor operates from a 12 to 24 VDC supply and includes a 2 m pre-wired cable. Its compact rectangular shape supports installation where mounting area is limited. Within the E3T Series, the E3T-FT14 2M provides the Dark-ON PNP configuration. Related Dark-ON through-beam sensors are available across the Omron Sensor Range.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3T-FT14 2M |
Omron E3T-FT14 2M Photoelectric Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Through-beam |
| Shape | Rectangular type |
| Sensing Distance | 500 mm |
| Power Supply Voltage | 12 to 24 VDC |
| Output Configuration | PNP |
| Connection Method | Pre-wired cable length 2m |
| Current Consumption | 30 mA max. (Emitter 10 mA max., Receiver 20 mA max.) |
| Light Source (Wavelength) | Red LED |
| Operation Mode | Dark-ON |
| Response Time | 1 ms max. |
| Degree Of Protection | IP67 |
| Material | Polybutylene terephthalate |
| Material Lens | Denatured Polyarylate |
| Weight | 40g |
The Omron E3T-FT14 2M Photoelectric Sensor uses through-beam sensing across a maximum distance of 500 mm in an ultrathin rectangular body. The sensing set uses the E3T-FT14-L emitter and E3T-FT14-D receiver. A red LED creates the optical path between both sensing sides, while the PNP output transfers the switching state from the receiver to compatible machine-control circuitry. Dark-ON operation defines the specified output behavior. The sensor operates from 12 to 24 VDC, with total current consumption of 30 mA max., consisting of 10 mA max. for the emitter and 20 mA max. for the receiver. Operate or reset time is specified at 1 ms max. A 2 m pre-wired cable provides direct electrical connection.
For an Omron PNP through beam photoelectric sensor requiring Dark-ON operation and 500 mm sensing, the corresponding model is the E3T-FT14. Polybutylene terephthalate is listed for the housing, while denatured polyarylate is specified for the optical section. IP67 protection is stated, along with an approximate weight of 40 g. Its specification also suits searches for an Omron Dark ON PNP sensor and Omron compact through beam sensor. The 1 ms response supports rapid object-presence and position switching in compact automation equipment. For the related Light-ON PNP model with the same 500 mm sensing distance and 2 m cable, see E3T-FT13 2M.
