Omron E3T-FL13 2M Ultracompact Photoelectric Sensor
Omron E3T-FL13 2M is an ultrathin BGS reflective photoelectric sensor designed for sensing targets across a short 1 to 15 mm range. Background suppression helps separate the intended target zone from surfaces positioned farther behind it. A red LED provides the optical sensing source, while the NPN output transfers the switching state to compatible machine-control circuitry. Light-ON operation defines the specified output logic, and response time is listed at 1 ms max. The sensor operates from 12 to 24 VDC, consumes up to 20 mA, and uses a 2 m pre-wired cable for connection. Within the E3T Series, the E3T-FL13 2M provides a compact Light-ON BGS configuration. Related ultrathin BGS sensors can be explored across the Omron Sensor Range.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3T-FL13 2M |
Omron E3T-FL13 2M Photoelectric Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | BGS reflective |
| Shape | Rectangular type |
| Sensing Distance | 1 to 15 mm |
| Power Supply Voltage | 12 to 24 VDC |
| Output Configuration | NPN |
| Connection Method | Pre-wired cable length 2m |
| Current Consumption | 20 mA max. |
| Light Source (Wavelength) | Red LED |
| Operation Mode | Light-ON |
| Response Time | 1 ms max. |
| Degree Of Protection | IP67 |
| Material | Polybutylene terephthalate |
| Material Lens | Denatured Polyarylate |
| Weight | 20g |
The Omron E3T-FL13 2M Photoelectric Sensor uses BGS reflective sensing across a short 1 to 15 mm range in an ultrathin rectangular body. Background suppression helps keep the sensing area focused on the intended target while reducing the influence of surfaces positioned farther behind it. A red LED supplies the optical light, and the built-in amplifier processes the sensing signal before the NPN output transfers the switching state to compatible industrial control circuitry. Light-ON operation is specified. The sensor operates from 12 to 24 VDC, consumes up to 20 mA, and provides a 1 ms max. response time. A 2 m pre-wired cable provides connection, while the compact body supports installation in restricted machine areas.
For an Omron BGS reflective photoelectric sensor requiring NPN output and Light-ON operation, the relevant model is the E3T-FL13. Its sensing range extends from 1 to 15 mm, making it suitable for very short-distance object presence and position sensing. Polybutylene terephthalate is listed for the housing, with denatured polyarylate specified for the optical section. IP67 protection and an approximate weight of 20 g are stated. Its configuration also suits searches for an Omron Light ON BGS sensor and Omron compact NPN photoelectric sensor. For a related NPN BGS version using Dark-ON operation over the same 1 to 15 mm sensing range, see E3T-FL12 2M.
