Omron E2E-X5MF1 2M Proximity Sensor
Omron E2E-X5MF1 2M is an M12 unshielded inductive proximity sensor with a 5 mm sensing distance and a 0 to 4 mm setting distance. It uses a PNP DC 3-wire output with NO operation and a pre-wired 2 m oil-resistant PVC cable. The supply range is 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 15 × 15 × 1 mm standard sensing object. Response frequency is 0.4 kHz, current consumption is 13 mA max., and differential travel is 10% max. of sensing distance. A red operation indicator and load short-circuit, surge, and reverse-polarity protection are specified. The E2E-X5MF1 belongs to the Proximity sensor range from Omron sensor products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X5MF1 2M |
Omron E2E-X5MF1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M12 |
| Mounting | Unshielded |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output Configuration | PNP, DC 3 Wire |
| Operation Mode | NO |
| Connection | Pre Wired, Length 2M |
| Cable Specifications | PVC (oil-resistant) |
| Power Supply Voltage | 12 to 24 VDC |
| Standard Target | Iron, 15 ×15 × 1 mm |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 0.4 kHz |
| Current Consumption | 13 mA max. |
| Indicator | Operation indicator (red) |
| Protection Circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
The Omron E2E-X5MF1 2M Proximity Sensor uses an M12 unshielded inductive sensing body with a 5 mm sensing distance and a 0 to 4 mm setting distance. Its electrical output is PNP, DC 3-wire with NO operation, connected by a pre-wired 2 m oil-resistant PVC cable. The operating supply is 12 to 24 VDC. Ferrous metal is listed as the detectable object, with an iron 15 × 15 × 1 mm standard sensing object. Response frequency is 0.4 kHz, current consumption is 13 mA max., and differential travel is 10% max. of sensing distance. A red operation indicator is specified. Load short-circuit protection, surge suppression, and reverse-polarity protection form the listed protection circuit.
The sensor is rated for operation and storage from -40 to 85°C without icing or condensation and 35% to 95% humidity without condensation. Temperature influence is ±15% max. of sensing distance at 23°C across -40 to 85°C and ±10% max. across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. IP67 is the specified degree of protection. For the same M12 unshielded 5 mm E2E format with a 2 m cable and NO operation but an NPN output, see E2E-X5ME1 2M.
