Omron E2B-M30KN20-M1-C1 Proximity Sensor
Omron E2B-M30KN20-M1-C1 is an M30 unshielded inductive proximity sensor with a 20 mm sensing distance and short-body construction. It provides a DC 3-wire NPN output with NO operation through an M12 connector and operates from 10 to 30 VDC. Ferrous metal is the specified detectable object, with a 60 × 60 × 1 mm standard sensing object. Response frequency is 100 Hz, current consumption is 10 mA max., and differential travel is 10% max. of sensing distance. A yellow operation indicator and output reverse-polarity, power-source reverse-polarity, surge, short-circuit, and IP67 protection are specified. The E2B-M30KN20-M1-C1 is listed under M30 proximity sensors from Omron industrial sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2B-M30KN20-M1-C1 |
Omron E2B-M30KN20-M1-C1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting | Unshielded |
| Sensing Distance | 20 mm |
| Body Length | Short Body |
| Output | DC 3-wire |
| Output Configuration | NPN |
| Operation Mode | NO |
| Connection | M12 Connector |
| Power Supply Voltage | 10 to 30 VDC |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard Sensing Object | 60 × 60 × 1 mm |
| Response Frequency | 100Hz |
| Current Consumption | 10 mA max |
| Indicator | Operation indicator (Yellow LED) |
| Protection Circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient Temperature Range | Operation and storage : -25 to 70ºC (with no icing or condensation) |
| Ambient Humidity Range | Operation and Storage: 35 to 95% |
| Voltage Influence | ±1% max. of sensing distance in 24 VDC ±15% |
| Standard And Listings | (1) IP67 (IEC60529) (2) EMC (EN60947-5-2) |
| Material Case | Brass-nickel plated |
| Material Sensing Surface | PBT |
| Material Cable | Standard cable is 4 mm dia. PVC. |
| Material Clamping Nut | Brass-nickel plated |
The Omron E2B-M30KN20-M1-C1 Proximity Sensor uses an M30 unshielded inductive sensing body with a 20 mm sensing distance and short-body construction. It provides a DC 3-wire NPN output with NO operation through an M12 connector and operates from 10 to 30 VDC. Ferrous metal is the specified detectable object, with a 60 × 60 × 1 mm standard sensing object. Response frequency is 100 Hz, current consumption is 10 mA max., and differential travel is 10% max. of sensing distance. A yellow operation indicator is provided. Output reverse-polarity protection, power-source reverse-polarity protection, surge suppression, and short-circuit protection are included.
Operating and storage conditions for the E2B-M30KN20-M1-C1 are -25 to 70°C without icing or condensation, with humidity from 35% to 95%. Voltage influence is ±1% max. of sensing distance at 24 VDC ±15%. IP67 according to IEC 60529 and EMC according to EN60947-5-2 are specified. Nickel-plated brass is listed for the case and clamping nut, PBT for the sensing surface, and PVC for the standard cable specification. The sensing distance is specified to decrease with non-ferrous metal. The 100 Hz response applies to this unshielded configuration. For the same M30 unshielded 20 mm NPN NO sensing configuration with a pre-wired 2 m connection instead of the M12 connector, see E2B-M30KN20-WP-C1 2M.
